08-11-2021, 02:02 PM | #1 |
Theoren Hanks
|
NPP re-learn??
So I recently bought a Stainless Works system and my NPP valves aren't fully closing. I tried doing a re-learn and they'll fully close. However as soon as the re-learn ends the commanded state drops from 85.11% during the re-learn, to 80% when closed. I just need to learn how to get this re-learn to stick and allow those valves to fully close. Any help? I'm using a Launch X-431 to interact with the vehicle
|
Post Reply
|
|
|