Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Wheels and Tires Talk Sponsored by The Tire Rack


Reply
 
Thread Tools
Old 07-27-2018, 04:58 PM   #15
vinman
The BBOMG fill-in husband
 
vinman's Avatar
 
Drives: 2015 2SS/RS 1LE AKA V1LE
Join Date: Aug 2010
Location: Elmira, NY
Posts: 4,458
Mine works, same one, maybe a bad one
__________________
UPSTATE C5 MEMBER
vinman is offline   Reply With Quote
Old 07-28-2018, 06:53 AM   #16
Rock-It Man
376 cubic inches of fun
 
Rock-It Man's Avatar
 
Drives: 2023 Camaro ZL1 A10
Join Date: Jul 2010
Location: MA
Posts: 4,033
Quote:
Originally Posted by gringo View Post
Driving around the block a few times does it for me.
No it doesn't. Driving around the block will restore the pressure readout, but if you have swapped wheel positions, the readout will be from the old positions not the new ones.

That is the whole point of the re-learn procedure.
Rock-It Man is offline   Reply With Quote
Old 07-28-2018, 07:43 AM   #17
Spurshot
 
Drives: 2014 2SS blue
Join Date: Jun 2016
Location: Socal
Posts: 689
Put the driver in learning mode, walk around the car twice, push the driver door lock button twice for 1/2 second each time, turn the key to on, honk the horn 3 long blasts 2 seconds minimum, say "sum bitz, sum bitz, sum bitz" loudly into the overhead microphone, start the car, drive to the tire shop, put the driver in beg mode, fixed.
__________________
Spurshot is offline   Reply With Quote
Old 07-28-2018, 09:08 AM   #18
sdynak

 
Drives: 2010 1SS
Join Date: Aug 2015
Location: Bayville, NJ
Posts: 936
Quote:
Originally Posted by Spurshot View Post
Put the driver in learning mode, walk around the car twice, push the driver door lock button twice for 1/2 second each time, turn the key to on, honk the horn 3 long blasts 2 seconds minimum, say "sum bitz, sum bitz, sum bitz" loudly into the overhead microphone, start the car, drive to the tire shop, put the driver in beg mode, fixed.
__________________
2010 1SS LS3, Black, 235/250, .621/.615, 114 + 4, Kooks Stepped Headers, 3.91's, Bo White PTB, Flowmaster Mufflers, Cold Air Industries CAI, Apex Scoop & Windshield Washer Relocate, SLP Wheels, Skip Shift Eliminate, Barton Flat Stick, OEM HID/Halos, Dyno Tuned by ECS
sdynak is offline   Reply With Quote
Old 07-28-2018, 09:17 AM   #19
Mike J
 
Mike J's Avatar
 
Drives: 2015 Topless Btch RS
Join Date: Mar 2016
Location: Montreal...Land of mostly Mustangs
Posts: 574
Mine works with a battery
Attached Images
 
Mike J is offline   Reply With Quote
Old 07-28-2018, 03:25 PM   #20
Swap
 
Drives: 2014 Camaro 2SS/RS
Join Date: Jan 2017
Location: Poland
Posts: 18
Thx all od You...probably have a bad one...did everything correct, tested 2 new batteries too...
Swap is offline   Reply With Quote
Old 07-28-2018, 03:45 PM   #21
Scotty D

 
Drives: 2014 1le 1SS CRMT
Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
I bought one off Ebay works perfect
Scotty D is offline   Reply With Quote
Old 07-29-2018, 10:57 AM   #22
Kopterman

 
Kopterman's Avatar
 
Drives: 2014 Bright Yellow 2SS/RS
Join Date: Apr 2014
Location: NH
Posts: 794
Your in Poland, your TPMS sensors might be a different frequency...
Kopterman is offline   Reply With Quote
Old 07-29-2018, 11:30 AM   #23
steakmaker
 
steakmaker's Avatar
 
Drives: '10 Camaro SS,Jeep Commander Hemi
Join Date: Mar 2010
Location: Cicero,NY
Posts: 567
it works fine!

Quote:
Originally Posted by Swap View Post
Hi guys.
Bought this one:
Attachment 949064
but doesnt work...
Could You tell me which should I buy?
Regards...
Tire pressure screen has to be in the learned mode w/key on,push the set button on the end of the turn signal stalk,start @ the front left,0ne beep,go around to the rt front,one beep, continue till you reach ,lft rear and 4 beeps & you're done.
steakmaker is offline   Reply With Quote
Old 07-29-2018, 01:20 PM   #24
Rock-It Man
376 cubic inches of fun
 
Rock-It Man's Avatar
 
Drives: 2023 Camaro ZL1 A10
Join Date: Jul 2010
Location: MA
Posts: 4,033
Quote:
Originally Posted by Kopterman View Post
Your in Poland, your TPMS sensors might be a different frequency...
Good point. The sensors might not be OEM.

Even here in the US, I had to stop a tire shop from installing sensors that worked with their proprietary tool but not the GM specified tool.

Can of worms.
Rock-It Man is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:50 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.