[Kaizer_911]

Originally Posted by guapo

Good afternoon. This is answered from Socialmedia@GM.com about the units built of the FIFTY edition:



EMAIL this email and you can get your build sheet. I did..

Thanks! I couldn’t recall the address. Brain fart.


Sent from my iPhone using Tapatalk

[Soleil]

Originally Posted by KyBoy

Never seen one glue on. Who makes it?

Heath

Maxton Design. You can also bolt it or with rivets but I like the hidden connection. With glue it looks more OEM.

Originally Posted by guapo

SOLEIL,
That must be some killer glue...

It is the same you use to glue a rear spoiler. The car manufacturer uses it as well.

[KyBoy]

Hopefully everyone gets some seat time on this beautiful Saturday!

Heath

[Kaizer_911]

Originally Posted by KyBoy

Hopefully everyone gets some seat time on this beautiful Saturday!

Heath

Jealous. I’m getting seat time today. But at work. Back to school season is here. Lots of exams abs glasses today.


Sent from my iPhone using Tapatalk

[Cmax]

[QUOTE=KyBoy;10587697]Hopefully everyone gets some seat time on this beautiful Saturday![IMG]https://uploads.tapatalk

I did get some time in..... this morning I took the long way to cars and coffee.
I met a few Mopar guys. We all had some fun ribbing each other and we all agreed, anything but a mustang.
One of them brought his ‘18 challenger scat pack.... admittedly the car looked pretty dang good with the shaker hood. He showed me under the hood and it looked good too. I mentioned how I liked the plastic panel in front that gave it a clean look, and was nice to hold wrenches. I pointed to the two shallow holes and he said they call those drink holders. See my pic...
Luckily they laughed when I said how nice of the factory to think to give you a spot for your beer, seeins how much time you have to spend fixin it....

[KyBoy]

[QUOTE=Cmax;10587897]

Originally Posted by KyBoy

Hopefully everyone gets some seat time on this beautiful Saturday![IMG]https://uploads.tapatalk



I did get some time in..... this morning I took the long way to cars and coffee.

I met a few Mopar guys. We all had some fun ribbing each other and we all agreed, anything but a mustang.

One of them brought his ‘18 challenger scat pack.... admittedly the car looked pretty dang good with the shaker hood. He showed me under the hood and it looked good too. I mentioned how I liked the plastic panel in front that gave it a clean look, and was nice to hold wrenches. I pointed to the two shallow holes and he said they call those drink holders. See my pic...

Luckily they laughed when I said how nice of the factory to think to give you a spot for your beer, seeins how much time you have to spend fixin it....

Saweet!

Heath

[Kaizer_911]

[QUOTE=Cmax;10587897]

Originally Posted by KyBoy

Hopefully everyone gets some seat time on this beautiful Saturday![IMG]https://uploads.tapatalk



I did get some time in..... this morning I took the long way to cars and coffee.

I met a few Mopar guys. We all had some fun ribbing each other and we all agreed, anything but a mustang.

One of them brought his ‘18 challenger scat pack.... admittedly the car looked pretty dang good with the shaker hood. He showed me under the hood and it looked good too. I mentioned how I liked the plastic panel in front that gave it a clean look, and was nice to hold wrenches. I pointed to the two shallow holes and he said they call those drink holders. See my pic...

Luckily they laughed when I said how nice of the factory to think to give you a spot for your beer, seeins how much time you have to spend fixin it....

That’s funny, I like the drink holder comment. Stealing that.


Sent from my iPhone using Tapatalk

[Claus]

Originally Posted by KyBoy

Hopefully everyone gets some seat time on this beautiful Saturday!

Heath

Gorgeous beast!!

Does anybody by any chance know the color code for this 1LE rims??
thinking of powdercoating my 50th wheels this exact color or gun metal gray

[RicSimonis]

I got some extra seat time today. (I was able to drive her to work all week.) Drove up to Morrison, CO to a place called “The Fort” for dinner. Stayed off the main highways for some pretty decent twisties.

[KyBoy]

Originally Posted by Claus

Gorgeous beast!!



Does anybody by any chance know the color code for this 1LE rims??

thinking of powdercoating my 50th wheels this exact color or gun metal gray

Thanks. I have no clue, I tried to find a match as well


Heath

[Kaizer_911]

Originally Posted by RicSimonis

I got some extra seat time today. (I was able to drive her to work all week.) Drove up to Morrison, CO to a place called “The Fort” for dinner. Stayed off the main highways for some pretty decent twisties.

Awesome! The Fort sounds like a cool place.


Sent from my iPhone using Tapatalk

[kpgreenwell]

Hey guys I have a question. I am finally getting black bow ties for the front and rear. My question is for the rear one. Is the bow tie glued on the black fifty decal or is there a bow tie cut around it? And what is the easiest way to get it off without damaging the black decal?

[lcd550]

Originally Posted by kpgreenwell

Hey guys I have a question. I am finally getting black bow ties for the front and rear. My question is for the rear one. Is the bow tie glued on the black fifty decal or is there a bow tie cut around it? And what is the easiest way to get it off without damaging the black decal?

It's attached with double-sided tape. I used the procedure below to remove the rear badge:

https://www.camaro6.com/forums/showt...ghlight=bowtie

Also, another tip is to mask the area of the original bowtie so you know where to accurately place the new one. There is a write-up on it but I could not find it.

[KyBoy]

Originally Posted by lcd550

It's attached with double-sided tape. I used the procedure below to remove the rear badge:



https://www.camaro6.com/forums/showt...ghlight=bowtie



Also, another tip is to mask the area of the original bowtie so you know where to accurately place the new one. There is a write-up on it but I could not find it.

+1

Heath