My Heartbeat Supercharger 2011 2SS M6 project - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nighthawk89 · 05-26-2015, 09:27 PM

This is the progression of my 2011 2SS M6 Heartbeat Supercharged beast. I have a build thread but i figured id let some people check it out on here and shed some of their experiences and advice regarding my build. You can see my current mods in the signature that are either already on the car or are going on this week. Stay tuned!

What else do you guys recommend to add to my Current Parts list?
I am going to be ordering a Mantic 9000 and also install a BTR Stage 3 PD Blower cam with the appropriate Cam Upgrades but besides that i am at a stand-still for ideas.

Should i stick with stock gears? Any particular swap that you would recommend that i would enjoy?

PlatinumIce · 05-26-2015, 09:44 PM

you will enjoy it

It rips man just the heartbeat by itself.
I cant imagine what its going to be like with all the other mods..

Nighthawk89 · 05-27-2015, 01:00 AM

Tomorrow i will be installing
-81mm Pulley
-Kooks Headers with Cat-less connection pipes
-Corsa ZL1 Quad Catback Exhaust with Black tips
-V-maxx TB
-ADM FPCM
-ID850's
-Trix 7's

Anaconda · 05-27-2015, 09:15 AM

Take plenty of vids.

Not many videos out there of Camaro's with the heartbeat. I've been looking at blowers in the future and have my eye on the heartbeat.

Nighthawk89 · 05-27-2015, 09:29 AM

Quote:

Originally Posted by Anaconda

Take plenty of vids.

Not many videos out there of Camaro's with the heartbeat. I've been looking at blowers in the future and have my eye on the heartbeat.

Video's will be on there way today. Car drives amazing. On the way home last night a white 5.0 GT pulled up next to me and it sounded modded to some extent (Headers, Exhaust ETC) and i heard him down shift and i went ahead and lit him up a bit and man does this puppy get going. Needless to say i blew past him and he gave me a big thumbs up once he caught up..

Nighthawk89 · 05-27-2015, 09:48 AM

Also, If anyone has a Heartbeat and can tell me where to properly plumb in my elite E2 catch -can id appreciate it! If you notice in the picture right below the boost reference valve (I believe thats what its called) There is the stock "U" connection that basically push clips onto the snout i believe and another longer steel nipple below the snout. Before the blower was on this is where i ran the catch can into.

cc-rider · 05-27-2015, 10:17 AM

Awesome build. What all did you have to do to the supercharger kit to have it fit on the 2011's? I thought that their kit was only for the '14+ models...

Scuzz · 05-27-2015, 10:56 AM

Heartbeat all the way

Nighthawk89 · 05-27-2015, 11:05 AM

Quote:

Originally Posted by Scuzz

Heartbeat all the way

Nice ride man!!
Lets keep the build pictures coming you guys!

Nighthawk89 · 05-27-2015, 11:07 AM

Quote:

Originally Posted by cc-rider

Awesome build. What all did you have to do to the supercharger kit to have it fit on the 2011's? I thought that their kit was only for the '14+ models...

You are correct. I worked with magnuson to develope this supercharger on my vehicle for the 2010-2012 year range.

Eli · 05-27-2015, 11:35 AM

Nighthawk, any idea when they will make that kit available to the general public?

Nighthawk89 · 05-27-2015, 11:56 AM

Quote:

Originally Posted by Eli

Nighthawk, any idea when they will make that kit available to the general public?

At this point ill be leaving that up to Magnuson to disclose.

Nighthawk89 · 05-27-2015, 12:29 PM

05-26-2015, 09:27 PM	#1
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	My Heartbeat Supercharger 2011 2SS M6 project This is the progression of my 2011 2SS M6 Heartbeat Supercharged beast. I have a build thread but i figured id let some people check it out on here and shed some of their experiences and advice regarding my build. You can see my current mods in the signature that are either already on the car or are going on this week. Stay tuned! What else do you guys recommend to add to my Current Parts list? I am going to be ordering a Mantic 9000 and also install a BTR Stage 3 PD Blower cam with the appropriate Cam Upgrades but besides that i am at a stand-still for ideas. Should i stick with stock gears? Any particular swap that you would recommend that i would enjoy? Attached Images Last edited by Nighthawk89; 05-27-2015 at 09:33 AM.

05-26-2015, 09:44 PM	#2
PlatinumIce WILD CANADIAN HEARTBEAT Drives: 2014 2SS 1LE RS, 2014 ZL1& 2024 ZL1 Join Date: Sep 2014 Location: Camrose, Alberta Posts: 477	you will enjoy it __________________ 700/633 91Octane Street Tune=750/670 VP109 Race Tune TVS2300 Heartbeat SC,ADM Dual Fuel Pumps/ Module, BRM lowered 1", performance rotors, hawks pads, SS Braided lines, GT-14cam, 78mm pulley, AR LT Headers, Cat Deletes, Borla S catback, tinted, 1/LE emblems, 65lb Injectors, Elite catch can,dual valve springs, titanium retainers, super conductor wires and insulators, Robo Fab CAI, Oversize intercooler reservoir, Oracle ghost side markers, Black out Bowties & SS,ZL1 splash guards, Michelin PSS. Built and tuned by Davenport Motorsports (WILD1LE)

05-27-2015, 09:15 AM	#5
Anaconda Drives: 2013 Camaro 1SS 6-speed VR Join Date: Mar 2008 Location: Somewhere nice and cool Posts: 303 View My Garage	Take plenty of vids. Not many videos out there of Camaro's with the heartbeat. I've been looking at blowers in the future and have my eye on the heartbeat. __________________ 2013 Victory Red 1SS 6-speed w/ black stripes ordered 8/15/12 Delivered 10/2/2012! Corsa ZL1 catback exhaust, Black CAI intake with scoop and washer bottle relocation

05-27-2015, 10:56 AM	#9
Scuzz Drives: 2012 Camaro SS Join Date: Aug 2013 Location: Mckinney, TX Posts: 347 View My Garage	Heartbeat all the way Attached Images __________________ 2012 Camaro SS Automatic AGP Twin Turbo LSX427 / ADM Magic / 4L80 “1360 Rwhp 1225 Rwtq 25 lbs of boost”

05-27-2015, 01:00 AM	#4
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	Tomorrow i will be installing -81mm Pulley -Kooks Headers with Cat-less connection pipes -Corsa ZL1 Quad Catback Exhaust with Black tips -V-maxx TB -ADM FPCM -ID850's -Trix 7's

05-27-2015, 09:48 AM	#7
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	Also, If anyone has a Heartbeat and can tell me where to properly plumb in my elite E2 catch -can id appreciate it! If you notice in the picture right below the boost reference valve (I believe thats what its called) There is the stock "U" connection that basically push clips onto the snout i believe and another longer steel nipple below the snout. Before the blower was on this is where i ran the catch can into.

05-27-2015, 10:17 AM	#8
cc-rider Drives: 2010 Camaro SS Join Date: Dec 2006 Location: MN Posts: 1,172	Awesome build. What all did you have to do to the supercharger kit to have it fit on the 2011's? I thought that their kit was only for the '14+ models...

05-27-2015, 11:35 AM	#12
Eli Drives: 2011 Convertible SS/RS M6 Join Date: Apr 2012 Location: Claverack, NY Posts: 71 View My Garage	Nighthawk, any idea when they will make that kit available to the general public?