08-24-2017, 10:36 AM | #43 |
Drives: ZL1 1LE Join Date: Oct 2016
Location: California
Posts: 1,297
|
This car comes stock with 285/305 and I wanted to try something with more tire up front.
__________________
|
08-28-2017, 10:14 PM | #44 |
1st Civ. Div.
Drives: Camaroless for now...RIP "Big SexZ" Join Date: Dec 2007
Location: Savannah, Ga
Posts: 2,726
|
They should clear with no problem since the mag ride struts stick out further than the regular struts from what I'm led to believe but thats just what I've heard and not fact until we can get someone to test it out first.
__________________
Swift....Silent....Deadly
|
08-30-2017, 09:54 AM | #45 |
Life's Short, Live Fast!
Drives: 2017 Hyper Blue A10 ZL1 Join Date: Nov 2016
Location: London, KY
Posts: 2,015
|
Thanks for the great info Sean!!
From the moment we all heard about the ZL1 1LE, everyone wanted to know if the 1LE wheels would fit the standard ZL1, so I started taking measurements on my ZL1. I didn't know the exact offset of the 1LE wheels for a while, but my guess was really close. I felt like the wheels would "just" fit and would only take minor changes to get them to, if they didn't bolt right up. I appreciate you confirming this. I may look at doing the swap in the future.
__________________
Life's Short, Live Fast! https://youtu.be/rTUv2p4T7OA 10.94 at 128 mph, 11.13 at 127mph 870 DA, https://youtu.be/e_X_LcpFp50 11.19 at 127mph 1100 DA, https://youtu.be/OXQiCQdQuH4 11.40 at 125mph 1800 DA
https://youtu.be/uWba1qs8M6Q 11.52 at 123mph 3500 DA TZQPHG '17 ZL1 HBM|A10|Nav|PDR|CFW Hood|ZL1 Mats 12/26/2016 Ordered! 2/8/2017 Built!! 3/2/2017 Brought Home!!! |
11-01-2017, 01:11 PM | #46 | |
Drives: E46 S54 race car, 964C2 Join Date: Feb 2017
Location: Southern Indiana
Posts: 912
|
Quote:
|
|
11-05-2017, 12:30 AM | #47 |
Drives: 2017 ZL1 Garnet Red Join Date: Feb 2015
Location: NW Wa
Posts: 354
|
Have you measured the stock tire height compared to the 1LE set up? I am curious if the speedometer would be accurate. Thanks, Sam.
|
11-05-2017, 01:23 AM | #48 | |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
Quote:
Other good option is the new APEX SM 10 wheels in 18" sizes 18x10.5" +22mm and 18x11 +43mm offsets. The fronts will require either 8mm spacer and some grinding or camber plates but it should be doable with some extra grinding and maybe back down the front camber to -2.7 camber from -3.0
__________________
|
|
03-08-2018, 05:25 PM | #49 |
Drives: 17' GTI DSG SE Join Date: Oct 2016
Location: Face of the Sun
Posts: 83
|
Will the SS 1LE wheels fit on the ZL1??
|
03-10-2018, 10:48 PM | #50 | |
Probably tired right now
Drives: 1Lap1LE | EV6 FE | 18 F150 Join Date: Sep 2010
Location: At the office (CLT, NC)
Posts: 1,133
|
Quote:
I'll post once they're on - As my NT01s are in the garage waiting. I have spacers just in case but I also have the strut tabs ground down a bit... so I likely will not need them ... -3.0* camber front and -1.25* rear for folks wondering
__________________
-Seven
'17 SS 1LE - 1LAP 1LE (Now with more 427!) '18 F150 Platinum Powerstroke diesel '22 Kia EV6 First Edition '18 RS3 (1 of 2) Cumulus Blue '24 911 T (ordered) Formers... '19 RS5 Sportback Sonoma Green | '07 Cayman S 6MT | '16 Audi S3 Prestige Viper Green (APR Stage 3+) | '19 Mustang Shelby GT350R | '17 SS 1LE MBM 575whp all-motor |
|
03-11-2018, 02:07 PM | #51 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
|
03-11-2018, 03:05 PM | #52 | |
Probably tired right now
Drives: 1Lap1LE | EV6 FE | 18 F150 Join Date: Sep 2010
Location: At the office (CLT, NC)
Posts: 1,133
|
Quote:
1.8 in rear - NICE
__________________
-Seven
'17 SS 1LE - 1LAP 1LE (Now with more 427!) '18 F150 Platinum Powerstroke diesel '22 Kia EV6 First Edition '18 RS3 (1 of 2) Cumulus Blue '24 911 T (ordered) Formers... '19 RS5 Sportback Sonoma Green | '07 Cayman S 6MT | '16 Audi S3 Prestige Viper Green (APR Stage 3+) | '19 Mustang Shelby GT350R | '17 SS 1LE MBM 575whp all-motor |
|
04-27-2018, 11:07 AM | #53 |
Drives: 2017 SS 1LE SIM Join Date: May 2017
Location: AZ
Posts: 59
|
Has anyone been consistently running the zl1 1le knock offs with these tires, on an ss 1le, with any problems. Id imagine we would be using a small spacer.
|
04-27-2018, 11:22 AM | #54 |
Drives: 2017 1SS 1LE Join Date: Aug 2017
Location: New Jersey
Posts: 391
|
I can't answer that question, but I can add that I recently mounted up 5th Gen Z28 wheels to my SS 1LE.
No spacer, but a grind of the strut, and took a little camber out of the knuckle which was corrected at the top with camber plates. I have -3 degrees of camber with no spacer as a result, so they're tucked in as close as possible. |
04-27-2018, 12:05 PM | #55 | |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
Quote:
thanks to Sean we created the 19x10.5 14et along with a 19x11 rear or just the standard 19x10 front. either way they will bolt right on to your car. |
|
04-27-2018, 12:32 PM | #56 |
Probably tired right now
Drives: 1Lap1LE | EV6 FE | 18 F150 Join Date: Sep 2010
Location: At the office (CLT, NC)
Posts: 1,133
|
Considering no replicas are offered in 19x11 front fitment currently... This question isn't really valid.
__________________
-Seven
'17 SS 1LE - 1LAP 1LE (Now with more 427!) '18 F150 Platinum Powerstroke diesel '22 Kia EV6 First Edition '18 RS3 (1 of 2) Cumulus Blue '24 911 T (ordered) Formers... '19 RS5 Sportback Sonoma Green | '07 Cayman S 6MT | '16 Audi S3 Prestige Viper Green (APR Stage 3+) | '19 Mustang Shelby GT350R | '17 SS 1LE MBM 575whp all-motor |
|
|
Post Reply
|
|
|