04-14-2024, 08:29 PM | #1 |
Drives: 17 Camaro 1SS/ 22 Charger Scatpac Join Date: Oct 2023
Location: Memphis Tn
Posts: 26
|
Caliber bolt Torque specs
What are the Torque Specs for the brake caliper bolts on the 17 SS?
|
04-14-2024, 09:41 PM | #2 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,671
|
111 lb-ft first pass, 15 to 30 degrees second (final) pass.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
04-14-2024, 11:06 PM | #3 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,882
|
Whoa, surprised by that jump on the rear vs. front bleeder valves. Thanks for posting sir.
|
04-15-2024, 12:25 PM | #4 |
Drives: 17 Camaro 1SS/ 22 Charger Scatpac Join Date: Oct 2023
Location: Memphis Tn
Posts: 26
|
|
04-15-2024, 12:27 PM | #5 |
Drives: 2004 BMW 330CI, 2022 1SS 1LE Join Date: Dec 2021
Location: NC
Posts: 755
|
I always use 148 lb-ft for the caliper bolts. I think it's about the same as 111 + 15-30 degrees.
|
04-22-2024, 02:05 PM | #6 |
Is it possible to torque the caliper bolts while on the ground / no lift?
__________________
2018 Camaro SS 1LE - 2011 370z - 2004 VW R32 - 2000 Civic Si Mods: Rotofab, Nick Williams 103mm TB, MSD IM, Kooks 1 7/8 Results: 470 hp / 447 tq |
|
|
|
Post Reply
|
|
|