LT2 Intake Purchase - Page 5

olblue75 · 09-16-2020, 12:34 PM

Wish these would fit a C7!

Matos1LE · 09-16-2020, 02:14 PM

Quote:

Originally Posted by olblue75

Wish these would fit a C7!

They do, you just have to modify the hood lol.

EricFormula350 · 09-16-2020, 02:15 PM

Quote:

Originally Posted by Fraxum

Super cool!! Me too. I was thinking of trying to fit the stock Lt1 cover. Looks good in there. It won't fool the dealer though.

Edit: Found it:

https://www.shopchevyparts.com/corve...5153_5250.html

Expensive. I got mine for $198 off eBay

QuarterMileSS · 09-16-2020, 10:29 PM

Quote:

Originally Posted by s346k

do you guys have long tube header pipes? i have 2" headers, it seems like the injector noise resonates through the primaries.

I have 1 7/8" Speed Engineering long tubes and I don't hear shit from my injectors.

BlackbeastSS2 · 09-17-2020, 06:59 AM

Quote:

Originally Posted by Mountain

FYI, the areas that were cut/ground on, you can take a tourch, with a very small/lite flame, and go over the area to "seal" or blend the work that has been done. Works pretty good on these PA-GF materials. Just takes a quick back-and-forth over the area with the flame a bit away and off the material.

$390 is not all that unreasonable to the intake+booster fitting+work to add the fitting+work to remove the ribs+MAP extension harness.

A heat gun does the same and IMO better. I use a heat gun on faded Jeep plastic tire guards or any of those parts that fade and works great. Darkens then right up by bringing up the oil used in making the plastic.

BlackbeastSS2 · 09-17-2020, 07:09 AM

Quote:

Originally Posted by EricFormula350

LT2 Intake Cover installed.

That’s the way to go with the added cover. Just need a custom plate to cover the corvette and add Camaro.

You can put the fuel feed line behind the rear of the manifold. Did it with my E85 on past 2016, you just have to slowly turn and a slight twist on fuel line. They do bend but don’t put a kink in the line.

Fraxum · 09-17-2020, 07:55 AM

Quote:

Originally Posted by EricFormula350

Expensive. I got mine for $198 off eBay

Yeah, I was looking there too. Red would be hard to get that cheap, but I can solve that with a spray can. I see there is one now with an open bid. But I still do not know when my C8 IM will arrive. So happy to buy it as a bolt on kit.

red6.2 · 09-17-2020, 06:56 PM

This is a great opportunity for someone to sell lt2 manifold covers with Camaro lettering instead of the stock corvette lettering. If someone is willing to to make them and does a oem finish and superb job on the intake manifold cover, I would likely buy one depending on the price of course.

Dvs510 · 09-17-2020, 07:15 PM

Quote:

Originally Posted by red6.2

This is a great opportunity for someone to sell lt2 manifold covers with Camaro lettering instead of the stock corvette lettering. If someone is willing to to make them and does a oem finish and superb job on the intake manifold cover, I would likely buy one depending on the price of course.

Gonna try and hit up emblempros and see if they have any plans on making a direct fit overlay for it

BlackbeastSS2 · 09-17-2020, 07:29 PM

Has anyone heard that the C7 guys are doing the same as we are doing with the LT2 intake manifold? I would think so.

red6.2 · 09-17-2020, 07:32 PM

what's up Dvs510! how' s the car running man. I think you know who i am lol. shhhhh! lol. whenever your down tho lets go to the track!

BlackbeastSS2 · 09-17-2020, 07:46 PM

Quote:

Originally Posted by Dvs510

Gonna try and hit up emblempros and see if they have any plans on making a direct fit overlay for it

Can anyone measure the length and height of the Corvette lettering?

We might be able to use something already on the market.

This one is
9.8inch x 0.86

vtirocz · 09-17-2020, 08:06 PM

Quote:

Originally Posted by BlackbeastSS2

Has anyone heard that the C7 guys are doing the same as we are doing with the LT2 intake manifold? I would think so.

I believe the LT1 intake was sized specifically to clear the C7 hood, so I doubt they are able to run it without interference issues.

Fraxum · 09-18-2020, 07:34 AM

Quote:

Originally Posted by red6.2

This is a great opportunity for someone to sell lt2 manifold covers with Camaro lettering instead of the stock corvette lettering. If someone is willing to to make them and does a oem finish and superb job on the intake manifold cover, I would likely buy one depending on the price of course.

That is a great idea. As for me I am Okay with Corvette on my motor. After all this motor was a Corvette engine as well.

09-16-2020, 12:34 PM	#57
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Wish these would fit a C7! __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

09-17-2020, 07:29 PM	#66
BlackbeastSS2 Drives: 2019 Camaro 1LE Shock Candy Join Date: Mar 2016 Location: Garage Posts: 1,757	Has anyone heard that the C7 guys are doing the same as we are doing with the LT2 intake manifold? I would think so. __________________ LT4 1.7 Supercharger snout ported & Meth 103 Katech TB, KATECH Custom Heads, DSX In-line fuel TSP Headers, Spec P Super Twin Clutch, TSP EL C7 CAM Diamond Piston & Manley Rods, Roto Fab Big Gulp BTR Push Rods,LS7 Lifters, ARP, FI Chiller, Kirkey Seats SJM Line Lock, Hurst Pistol Grip. 747/739 RWHP street tune - 821/794 RWHP track tune 101 octane. 2014 Mini Cooper countryman S All4 M6 daily driver

09-17-2020, 06:56 PM	#64
red6.2 Drives: 2010 camaro Join Date: Dec 2017 Location: Colorado Posts: 208	This is a great opportunity for someone to sell lt2 manifold covers with Camaro lettering instead of the stock corvette lettering. If someone is willing to to make them and does a oem finish and superb job on the intake manifold cover, I would likely buy one depending on the price of course.

09-17-2020, 07:32 PM	#67
red6.2 Drives: 2010 camaro Join Date: Dec 2017 Location: Colorado Posts: 208	what's up Dvs510! how' s the car running man. I think you know who i am lol. shhhhh! lol. whenever your down tho lets go to the track!

User Name		Remember Me?
Password