03-21-2020, 11:14 AM | #1 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
Best quality black lug nuts. (No rust spots)
So I purchased the spline lugs from MRR to go with my M017 wheels and I love the wheels but the lug nuts are not good quality. Only been mounted once and there are already rust spots where the socket touched (after one time of mounting...) looking for some strong better quality black lugs that I don’t have to worry about rusting immediately. The wheels and lugs have less than 500 miles on them. Oh and I might add I followed the wheel cleaning and sealing from Glen E with Sonax and Hydro2 right after install. that did not help with the lug nuts rust issue. Wheels are doing good though. Any advice thanks.
|
03-21-2020, 12:54 PM | #2 |
Drives: Hyper Blue 2SS Join Date: Jun 2013
Location: CA
Posts: 1,160
|
The ones I received from carid are rusting as well.
I'm going to try Gorilla: https://www.amazon.com/gp/product/B0...KIKX0DER&psc=1 or vinyl caps https://www.amazon.com/gp/product/B0...MKC85I20&psc=1 .
__________________
2SS, Hyper Blue, 8-Speed Automatic, NPP Exhaust, Magnetic Ride Control, Sunroof, Navigation, 5-Spoke Low-Gloss Black Wheels, Black Bowtie Emblems, Cargo Mat/Net
Mods: XPEL - Hood, Bumper, Headlights, & Side Mirrors JWM - Side Markers ZL1 Addons - Deluxe Rock Guards & Red Lift Pads GM - Dark Tail Lamps MRR - Gloss Black M017s Last edited by CamaroBody; 03-21-2020 at 01:12 PM. |
03-21-2020, 02:04 PM | #3 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
Gorilla FTW. Been using them on my Camaro for 7 1/2 years now, not a speck of rust and not a single problem with them.
|
03-21-2020, 02:13 PM | #4 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
Yea I was def looking at the gorilla ones! Trying to make sure on which ones are gonna fit. 26143BC I think are the correct ones.
|
03-21-2020, 02:22 PM | #5 |
Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,208
|
I bought black Gorillas. so far so good. I also heard you can use a plastic baggy when you take off chrome lugs and that will keep them from rusting. haven't tried it though.
|
03-21-2020, 02:36 PM | #6 |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,014
|
Just get the black plastic caps. That is what I use.
Unless you are going open lug design for a different look, all that is needed are caps to hide the chrome. This way you also keep the safety and integrity of the stock lugs.
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 Last edited by TRZ06; 03-21-2020 at 02:46 PM. |
03-21-2020, 02:42 PM | #7 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
The MRR wheels state that you have to use narrow lug nuts because the stock ones won’t fit in the aftermarket wheels. The spline style fit perfect but the quality is trash. I’m gonna order the gorillas and go from there. I know a ton of people are running MRR M017 wheels so I was hoping they would have some suggestions or recommendations.
|
03-21-2020, 03:13 PM | #8 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
I do like the idea of the caps but not sure if they will fit the skinny spline lug nuts I have on currently. That would be an easy solution though!
|
03-21-2020, 05:19 PM | #9 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
my mcguards are great
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
03-21-2020, 05:58 PM | #10 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
Those look good! And they look like they would be narrow enough for my aftermarket mRR wheels. Do you by chance remember what part# or model those are? I can’t deal with rusty lug nuts they are brand new. Not happy with the MRR Brand ones quality at all.
|
03-21-2020, 07:15 PM | #11 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,771
|
Using spline drive gorilla - happy with quality, daily driven, winter too. And they get swapped 10-15 times during summer season - race tires!
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
03-21-2020, 08:28 PM | #12 |
Drives: Camaro RS 2LT Join Date: Feb 2020
Location: Detroit
Posts: 333
|
Thanks. That will be what I’m going with. The mcgard just seem super expensive.
|
03-22-2020, 04:15 AM | #13 | |
Drives: 2019 Chevrolet Camaro SS 1LE Join Date: Nov 2016
Location: Arizona
Posts: 596
|
Quote:
|
|
03-22-2020, 06:55 AM | #14 |
Drives: '19 camaro 2ss Join Date: Jan 2020
Location: California
Posts: 115
|
anyone running a spike lug nuts on their camaro?
|
|
|
Post Reply
|
|
|