Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


Bigwormgraphix


Post Reply
 
Thread Tools
Old 10-10-2017, 10:28 PM   #1
Daniel20162ss
 
Drives: 2016 2ss
Join Date: Jan 2017
Location: Dayton Ohio
Posts: 118
2016 camaro 2ss with d1/stage 2 cooler WOW!!

Heres a quick video my tuner did! He had the car a few days dialing everything in. Final result was a afr of 11.7-11.8 and .789 lambda at about 80degrees outside at WOT. Car is stock motor, with 1-7/8 kooks lt with offroad pipes connected to factory npp, d1sc with 4.5" pulley, stage 2 cooler with open race valve, and snow performance stage 2 progressive meth/water injection using blue washer fluid. Tuned without meth to above numbers, brought meth in for another pull for a cooling only affect to keep iat under 90degrees at wot, and only dropping afr to approx 11.4-11.5, meth will not be on unless outside temps are over approx 75deg or I am at the track. Meth comes on at 50% @ 4lbs of boost and 100% at 11lbs(car rarely hits 11lbs) Engine dynamics dyno which is a "heartbreaker" dyno and usually reads 15% low on the conservative side, and seen it be a tops of 24% low compared to another local shops dynojet on the same day. The car pulls like a freight train and im very happy. Like and subscribe to his youtube channel for some badass builds, and leave him a comment of where you seen the video posted!




https://m.youtube.com/watch?v=TS79M7ZNqDU
Daniel20162ss is offline   Reply With Quote
Old 10-10-2017, 11:52 PM   #2
Swagger
DaWolfOfAllStreets
 
Drives: 17 C Coupe, 17 1LE, 16 Scion iA
Join Date: Jun 2017
Location: NJ
Posts: 205
Congrats on the kit sounds good...
Swagger is offline   Reply With Quote
Old 10-11-2017, 09:09 AM   #3
ShizzySupra
 
Drives: 16' Camaro 2SS
Join Date: Sep 2015
Location: Oregon
Posts: 381
Have to click on Youtube video for the details? Lame.
__________________
@DeathWatchCamaro on Insta
993whp Magnuson 2.3R
9.5 @ 145, Magnuson 2300, Full Weight 2SS, 17’s (810whp)
ShizzySupra is offline   Reply With Quote
Old 10-12-2017, 02:43 PM   #4
exxit
 
Drives: 2016 1SS D1SC Methfed Lowered Wrapd
Join Date: Apr 2016
Location: CA
Posts: 632
Awesomeness! If you run a bit more meth you can easily squeeze some more power out of the setup... Otherwise time to start saving for pumps, LT4 HPFP, injectors and maybe a cam.
__________________
//2016 1SS M6 D1SC Upgraded IC 4.25 Pulley//
// Alky Control Meth Kit running 100% methanol //
(purchased from JDP, installed by True Bliss Customs, tuned by NewEraPerformance in Augora Hills)
// 3M/Gotch Design Sponsored Gloss Deep Space Colorshift Wrap //
exxit is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:14 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.