10-04-2016, 12:51 AM | #1 |
Drives: 2019 ZL1 Join Date: Apr 2016
Location: San Jose, California
Posts: 154
|
Too paranoid!
Hi all,
Long story short, my dealer has agreed to replace the shift knob on my 2017 A8, due to a couple of scratches prior to delivery. I'm not sure if they have to tear the center console apart to remove the knob, but from the looks of it, seems to me that they have to. I'm being a bit paranoid as to touching any pieces on the center console because I'm afraid I would get rattle and noise once put back together. Any thoughts on this? Am I being too paranoid? Thanks in advance
__________________
Current: 2019 ZL1 | A10 | PDR
Past: 2017 2SS | Auto| Garnet Red Tintcoat | Adrenaline Red | 6 Piston Brembos | MRC | NPP | Illuminated Front Bowtie | Sunroof | Navigation | Ground effects | Dark tail lights |
10-04-2016, 02:17 AM | #2 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Yes you are......
|
10-04-2016, 02:38 AM | #3 |
Drives: 2022 Satin Steel ZL1 M6 Join Date: Sep 2015
Location: Metro Denver
Posts: 331
|
The entire dash of my 2SS had to be removed to repair a HUD problem 3 weeks after I got the car. My dealership has a guy who does nothing but the "serious surgeries" on Corvettes and Camaros, and I was assured it would be as tight as it was from the factory. It sure seems that they were correct......9500 miles and no squeaks, creaks, or rattles.
|
10-04-2016, 06:35 AM | #4 |
Drives: Gen 6 Camaro RS Join Date: Dec 2015
Location: Miami FL
Posts: 1,725
|
No, you are not.....
|
10-04-2016, 06:37 AM | #5 |
Blessed ❤️
Drives: 2017 1LT RS I4 Join Date: Sep 2016
Location: Indiana
Posts: 2,577
|
__________________
2017 1LT RS I4 A8 BLACK ON BLACK
Kindness and compassion #OthersFirst |
10-04-2016, 06:46 AM | #6 | |
Drives: 2016 1LT M6 Join Date: Sep 2016
Location: South Florida
Posts: 93
|
Quote:
https://www.youtube.com/watch?v=L7700KMto-k |
|
10-04-2016, 10:59 AM | #7 |
Account Suspended
Drives: C7 Z06 manual, 18 Zl1 manual, etc Join Date: Dec 2013
Location: Spring Texas
Posts: 1,488
|
Yes you are lol. I pulled my whole dash assembly out to bypass my onstar on my 17. Zero issues
|
10-04-2016, 11:16 AM | #8 |
Drives: 2019 ZL1 Join Date: Apr 2016
Location: San Jose, California
Posts: 154
|
lol indeed. Thanks guys, feel better about it already :-), hard to live with a scratched shift knob with OCD and all.
__________________
Current: 2019 ZL1 | A10 | PDR
Past: 2017 2SS | Auto| Garnet Red Tintcoat | Adrenaline Red | 6 Piston Brembos | MRC | NPP | Illuminated Front Bowtie | Sunroof | Navigation | Ground effects | Dark tail lights |
|
|
Post Reply
|
|
|