10-26-2014, 07:54 PM | #1 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
Finally in the 11's!
So far best 60ft I can get. 2014 1le, cam only on a 20" drag radial.
|
10-26-2014, 07:59 PM | #2 |
Drives: 2011 SS/RS LS3 Join Date: Oct 2010
Location: Miami
Posts: 528
|
Congrats, nice run for the not so stellar 60'. Wish the slip showed the 1/8 mph.
|
10-26-2014, 08:03 PM | #3 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
Thanks. Yeah it's stupid it won't show 1/8 mph at all.. Just need to get the 60' down to at least 1.7 and I will be happy.
|
10-26-2014, 09:03 PM | #4 |
Drives: GM Join Date: Sep 2010
Location: Marydel, DE
Posts: 1,321
|
Dang that's it for mods drag radials and a cam?
__________________
Roto- Fab Cai, SLP 1 3/4" headers, 3"X pipe, LM2 cat back, Comp Cam & AI Heads, SLP UP, RPM Tuned, GPI Intake, Vmax TB, ADM Air Scoop, 3.91 Gears, Gforce driveshaft, Braille 21#, Elite Catch Can, Pfadt Tie Rods, Diff Bushings and Trailing arms, Eibach spings & sways, BMR cradle bushings, Nt555r's.
|
10-26-2014, 09:18 PM | #5 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
Btr stage 3 cam, kooks 1 7/8 headers, cai and a custom tune..
|
10-26-2014, 09:26 PM | #6 |
Drives: 2013 Camaro SS Turbo Join Date: Apr 2014
Location: South Florida
Posts: 1,525
|
Btr stage 3 is it the ls3 NA cam or the btr stage 3 blower cam? Nice run any idea on hp/tq?
__________________
|
10-26-2014, 09:47 PM | #7 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
NA cam!! It makes power but I know 1/2 people don't believe the numbers are accurate but I really don't care. I know the car will go 122 in the 1/4 before the year is over.
|
10-26-2014, 09:54 PM | #8 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Nice what track did you race at?
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
10-26-2014, 09:56 PM | #9 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
This was at 41 or NLR..
|
10-26-2014, 10:12 PM | #10 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Cool, used to race there a lot back in the day.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
10-27-2014, 05:48 AM | #11 |
Drives: 2010 camaro ss Join Date: Jun 2010
Location: Port Arthur, Tx
Posts: 2,383
|
How did you pull off that 1.9 60ft? What rpm are you launching?
|
10-27-2014, 12:55 PM | #12 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
I left at little over 3000, car spun through 1st gear and it went the best time.. before this i would leave at 1500 and the car would fall flat on its face and best et i got was 12.29@118.61 with a 2.08 60'
|
10-27-2014, 02:29 PM | #13 |
Drives: 2011 Camaro SS Join Date: Jul 2014
Location: Mooresville, NC
Posts: 141
|
Car is rolling out the back half! Get that 60' down, it'll be real impressive.
|
10-27-2014, 08:34 PM | #14 |
Drives: 2012 camaro Join Date: Feb 2012
Location: Plano IL
Posts: 49
|
Thanks. I'm gonna go back to the track on Sunday to see if I can go 11.7. Just don't know how far I can push my stock rear.
|
|
|
|
|