Finally in the 11's! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Slow02ss · 10-26-2014, 07:54 PM

So far best 60ft I can get. 2014 1le, cam only on a 20" drag radial.

Irnwkrkev · 10-26-2014, 07:59 PM

Congrats, nice run for the not so stellar 60'. Wish the slip showed the 1/8 mph.

Slow02ss · 10-26-2014, 08:03 PM

Thanks. Yeah it's stupid it won't show 1/8 mph at all.. Just need to get the 60' down to at least 1.7 and I will be happy.

96MrBass · 10-26-2014, 09:03 PM

Dang that's it for mods drag radials and a cam?

Slow02ss · 10-26-2014, 09:18 PM

Btr stage 3 cam, kooks 1 7/8 headers, cai and a custom tune..

fif_gen_powa · 10-26-2014, 09:26 PM

Quote:

Originally Posted by Slow02ss

Btr stage 3 cam, kooks 1 7/8 headers, cai and a custom tune..

Btr stage 3 is it the ls3 NA cam or the btr stage 3 blower cam? Nice run any idea on hp/tq?

Slow02ss · 10-26-2014, 09:47 PM

NA cam!! It makes power but I know 1/2 people don't believe the numbers are accurate but I really don't care. I know the car will go 122 in the 1/4 before the year is over.

Pro Stock John · 10-26-2014, 09:54 PM

Nice what track did you race at?

Slow02ss · 10-26-2014, 09:56 PM

This was at 41 or NLR..

Pro Stock John · 10-26-2014, 10:12 PM

Cool, used to race there a lot back in the day.

camarosspower · 10-27-2014, 05:48 AM

How did you pull off that 1.9 60ft? What rpm are you launching?

Slow02ss · 10-27-2014, 12:55 PM

I left at little over 3000, car spun through 1st gear and it went the best time.. before this i would leave at 1500 and the car would fall flat on its face and best et i got was 12.29@118.61 with a 2.08 60'

Mark@PCMofNC · 10-27-2014, 02:29 PM

Car is rolling out the back half! Get that 60' down, it'll be real impressive.

Slow02ss · 10-27-2014, 08:34 PM

Thanks. I'm gonna go back to the track on Sunday to see if I can go 11.7. Just don't know how far I can push my stock rear.

10-26-2014, 07:54 PM	#1
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	Finally in the 11's! So far best 60ft I can get. 2014 1le, cam only on a 20" drag radial. Attached Images

10-26-2014, 09:03 PM	#4
96MrBass Drives: GM Join Date: Sep 2010 Location: Marydel, DE Posts: 1,321	Dang that's it for mods drag radials and a cam? __________________ Roto- Fab Cai, SLP 1 3/4" headers, 3"X pipe, LM2 cat back, Comp Cam & AI Heads, SLP UP, RPM Tuned, GPI Intake, Vmax TB, ADM Air Scoop, 3.91 Gears, Gforce driveshaft, Braille 21#, Elite Catch Can, Pfadt Tie Rods, Diff Bushings and Trailing arms, Eibach spings & sways, BMR cradle bushings, Nt555r's.

10-26-2014, 09:47 PM	#7
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	NA cam!! It makes power but I know 1/2 people don't believe the numbers are accurate but I really don't care. I know the car will go 122 in the 1/4 before the year is over. Attached Images

10-26-2014, 09:54 PM	#8
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Nice what track did you race at? __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

10-26-2014, 10:12 PM	#10
Pro Stock John Writer Drives: 2010 SS / 1967 Camaro Join Date: May 2009 Location: Chicago, IL Posts: 7,216	Cool, used to race there a lot back in the day. __________________ PROJECT HEAVY CHEVY Camaro Now: Mods for the Masses Part I \| Part II 13.15@106 1.95 \| 100% Stock 12.37@112 1.85 \| + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 \| + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 \| + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 \| + GPI VVT Cam + BW Ported Heads + CD 3800

10-26-2014, 07:59 PM	#2
Irnwkrkev Drives: 2011 SS/RS LS3 Join Date: Oct 2010 Location: Miami Posts: 528	Congrats, nice run for the not so stellar 60'. Wish the slip showed the 1/8 mph.

10-26-2014, 08:03 PM	#3
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	Thanks. Yeah it's stupid it won't show 1/8 mph at all.. Just need to get the 60' down to at least 1.7 and I will be happy.

10-26-2014, 09:18 PM	#5
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	Btr stage 3 cam, kooks 1 7/8 headers, cai and a custom tune..

10-26-2014, 09:56 PM	#9
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	This was at 41 or NLR..

10-27-2014, 05:48 AM	#11
camarosspower Drives: 2010 camaro ss Join Date: Jun 2010 Location: Port Arthur, Tx Posts: 2,383	How did you pull off that 1.9 60ft? What rpm are you launching?

10-27-2014, 12:55 PM	#12
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	I left at little over 3000, car spun through 1st gear and it went the best time.. before this i would leave at 1500 and the car would fall flat on its face and best et i got was 12.29@118.61 with a 2.08 60'

10-27-2014, 02:29 PM	#13
Mark@PCMofNC Drives: 2011 Camaro SS Join Date: Jul 2014 Location: Mooresville, NC Posts: 141	Car is rolling out the back half! Get that 60' down, it'll be real impressive.

10-27-2014, 08:34 PM	#14
Slow02ss Drives: 2012 camaro Join Date: Feb 2012 Location: Plano IL Posts: 49	Thanks. I'm gonna go back to the track on Sunday to see if I can go 11.7. Just don't know how far I can push my stock rear.