10-26-2020, 11:00 AM | #1 |
Drives: 2017 Camaro V6 RS Join Date: Apr 2014
Location: Gainesville, Florida
Posts: 64
|
Gauge cluster upgrade issues
Quick question for anyone who has upgraded the gauge cluster to the one with the larger screen. When you change drive modes on the new one for the v6 does it show the list of modes in a pop-up? I upgraded mine and I am not getting any notifications.
|
10-28-2020, 09:42 PM | #2 |
Long hauler
|
You had it programmed and did the wire harness from Gen5DIY if you had the 8” radio right?
IIRC you should have OEM functionality, maybe message the programmer
__________________
|
10-28-2020, 10:56 PM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,576
|
I had a 2LT V6 with the convenience package that comes with the large cluster, and the three modes (tour, sport, snow/ice) were displayed in a popup. It should look same as on the SS/ZL1 except there is no track mode.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
11-09-2020, 09:24 AM | #4 | |
Drives: 2017 Camaro V6 RS Join Date: Apr 2014
Location: Gainesville, Florida
Posts: 64
|
Quote:
The programmer tested it and nothing was wrong. When I re-installed it, all of the menus worked when the wiring harness's radio end was not plugged in. When connected to the radio, the pop ups stop working but everything else works. The harness was from GEN5DIY |
|
|
|
Post Reply
|
|
|