05-26-2022, 03:42 PM | #1 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 40
|
Rally stripe locations
Can someone post the measurements for how far apart the rally stripes are on the hood and on the rear deck.
Thank you
__________________
2011 Camaro 2SS Victory Red
Rotofab CAI, 160 Thermostat, Stainless Works Headers, Livernois Motorsports Thunderstorm Exhaust, GPI SS1, rodmod intake, ported tb by GPI, Remote Tune by GPI, Elite Engineering Catch Can, Rotofab washer relocation, JRE scoop, JRE Trans dipstick, BMR Toe Rods, BMR Trailing Arms, BMR subframe connectors, Polyurethane diff bushing and rear cradle mount's, RSM front crash bar |
05-26-2022, 05:11 PM | #2 | |
|
Quote:
2. 2 1/4" Rear 3. 1/4" Pin Stripe The stripes are 16.5" wide at the top of the hood. and that same 16.5 inches carries back to the rear deck stripes. Search the forum produced this as well: Originally Posted by organgrinder View Post seems like there were several suppliers to gm because the gm stripes aren't even all the same....but yes the center gap is 3", back of the hood is 16.5"(outside of pinstripe), the trunk lid narrows from back window 12 5/8 down to 12 3/8(outside of pinstripe), the pinstripe is 1/4" with 1/4" gap.....hope that helps.
__________________
Life is short, drive it like you stole it! Last edited by Wizard1183; 05-26-2022 at 05:22 PM. |
|
|
|
|
|