[vtirocz]

Originally Posted by L78toLT1

I'm gonna throw out the same question that I've posed several times in the past in hopes that new eyes will see it any give me some feedback:

Has anyone with a MRC equipped '16 SS installed the handling and lowering kits? I've got the handling kit and am very pleased with it. It's definitely a noticeable improvement on track, and only slightly more harsh on the street. I am hesitant to install the lowering kit as the MRC refresh is not available for 2016 cars. Does anyone have experience with this kit on a MRC '16 model?

For an SS with MRC, you'd want to get the 1LE spec kit (p/n 84556736): https://www.shopchevyparts.com/perfo...-92294543.html

For an SS without MRC, the lowering/handling kit is available (p/n 84203549 & 84401188):
https://www.shopchevyparts.com/perfo...-92292557.html
https://www.shopchevyparts.com/perfo...-92294544.html

The lowering kit comes with passive dampers, which would be a waste since you already have MRC, though it could be done if you want to lose the MRC setup. I would just get the kit designed around the dampers you have!

[Chrome383Z]

What’s the strut part#? Is that available if it ever needs replaced. That is one concern. Also would prob be nice for folks with aftermarket springs to have a better matched shock.

[WillyZ83]

Originally Posted by Crushin_LT1

https://www.shopchevyparts.com/perfo...-92294544.html


https://www.shopchevyparts.com/perfo...-92292611.html



Has anyone driven theirs as a daily with the lowering+suspension kits on? I'm interested but don't want a horrifyingly bad ride in my DD/only car.


Interested in results.

Bringing an older one back up for info. This should fit a 2021 1SS w/o MRC correct? can anyone verify that part# 84203549 will fit a 2021 ss?

[Sephx1]

Originally Posted by vtirocz

For an SS with MRC, you'd want to get the 1LE spec kit (p/n 84556736): https://www.shopchevyparts.com/perfo...-92294543.html

For an SS without MRC, the lowering/handling kit is available (p/n 84203549 & 84401188):
https://www.shopchevyparts.com/perfo...-92292557.html
https://www.shopchevyparts.com/perfo...-92294544.html

The lowering kit comes with passive dampers, which would be a waste since you already have MRC, though it could be done if you want to lose the MRC setup. I would just get the kit designed around the dampers you have!

I did all of these parts on a 2016 SS and it still doesn’t seem to be as tight as my 2021 SS 1LE. I believe the bushings in some of the other suspension components must be different also. Would be great to know what those parts are, too.