Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Cosmetic modifications (exterior and interior)


Phastek Performance


Post Reply
 
Thread Tools
Old 05-18-2022, 09:04 PM   #1
Mitch-LT1
 
Mitch-LT1's Avatar
 
Drives: Camaro LT1
Join Date: Mar 2022
Location: Bucks County PA
Posts: 10
Splitter Installed

I️ completed the first mod on my ‘22 LT1

I️ bought the splitter on Amazon.
https://www.amazon.com/dp/B08VRMFK7Z...PS3Q1A4JBY781E

I️ bought the gloss black version and it turned out great. The pre drilled holes align with the stock undercarriage holes and the paint quality is perfect.

Now I’m planning to install power mods
Attached Images
 

Last edited by Mitch-LT1; 05-19-2022 at 12:20 AM. Reason: Grammar Change
Mitch-LT1 is offline   Reply With Quote
Old 05-18-2022, 11:41 PM   #2
DorsoDuroJohn
 
Drives: 2021 Camaro LT1
Join Date: Oct 2020
Location: Minneapolis
Posts: 387
nice work !
DorsoDuroJohn is offline   Reply With Quote
Old 05-19-2022, 01:09 AM   #3
The_Dudebozo
 
Drives: 2016 2SS
Join Date: Mar 2019
Location: The 805 (central coast cali)
Posts: 111
Is this splitter shipped in three pieces then you put it together?
__________________
2016 Camaro 2SS A8 MRC NPP Sunroof. Addons: Stainless Works Redline axle back exhaust, Chevrolet cold air intake, C7 sideskirts/front splitter, Diode dynamics side markers
The_Dudebozo is offline   Reply With Quote
Old 05-19-2022, 01:19 AM   #4
2SS Capt
2020 Shadow Gray 2SS
 
2SS Capt's Avatar
 
Drives: 2020 2SS - A10, NPP, MRC, CAI
Join Date: Dec 2019
Location: San Diego (North County), CA
Posts: 2,984
Quote:
Originally Posted by Mitch-LT1 View Post
I️ completed the first mod on my ‘22 LT1

I️ bought the splitter on Amazon.
https://www.amazon.com/dp/B08VRMFK7Z...PS3Q1A4JBY781E

I️ bought the gloss black version and it turned out great. The pre drilled holes align with the stock undercarriage holes and the paint quality is perfect.

Now I’m planning to install power mods
Looks awesome!

Needs some Diode Dynamics Smoked Marker lights to get rid of those bright orange side markers!
__________________
2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting
Added after delivery: - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires

Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph...
2SS Capt is offline   Reply With Quote
Old 05-19-2022, 07:46 AM   #5
Mitch-LT1
 
Mitch-LT1's Avatar
 
Drives: Camaro LT1
Join Date: Mar 2022
Location: Bucks County PA
Posts: 10
Hi, yes it is shipped in three pieces. It’s also shipped with mounting screws but I️ used the OEM black screws.
Mitch-LT1 is offline   Reply With Quote
Old 05-19-2022, 08:25 AM   #6
ember1205
Hot Camaro
 
ember1205's Avatar
 
Drives: '20 2SS Convertible 6MT
Join Date: May 2020
Location: CT
Posts: 3,532
Looks good - splitter was my first mod as well followed very closely by the side skirts.

Does it come with the adhesive (tape) to adhere it at the very top portion where it meets the car directly?
ember1205 is offline   Reply With Quote
Old 05-19-2022, 09:08 AM   #7
Mitch-LT1
 
Mitch-LT1's Avatar
 
Drives: Camaro LT1
Join Date: Mar 2022
Location: Bucks County PA
Posts: 10
Hi ember1205
Thanks. It doesn’t come with adhesive but because the pre drilled holes align to the OEM holes it doesn’t need the tape. It came with pre-drilled holes and screws for additional support where the tape would be. I️ skipped this step though.
Mitch-LT1 is offline   Reply With Quote
Old 05-19-2022, 09:48 AM   #8
ember1205
Hot Camaro
 
ember1205's Avatar
 
Drives: '20 2SS Convertible 6MT
Join Date: May 2020
Location: CT
Posts: 3,532
Quote:
Originally Posted by Mitch-LT1 View Post
Hi ember1205
Thanks. It doesn’t come with adhesive but because the pre drilled holes align to the OEM holes it doesn’t need the tape. It came with pre-drilled holes and screws for additional support where the tape would be. I️ skipped this step though.
It really should be installed with the tape. Without it, debris can get in between the splitter and the painted area and end up causing damage. Additionally, that tape provides a lot of support for the splitter at highway speeds to keep it from bending downward. I would definitely remove it and put it back on with the tape in place.
ember1205 is offline   Reply With Quote
Old 05-19-2022, 09:53 AM   #9
Mitch-LT1
 
Mitch-LT1's Avatar
 
Drives: Camaro LT1
Join Date: Mar 2022
Location: Bucks County PA
Posts: 10
Ah good point. I’ll do that. Thanks for the recommendation!
Mitch-LT1 is offline   Reply With Quote
Old 05-20-2022, 07:08 AM   #10
BrandanK
 
Drives: 2021 Camaro SS 1LE
Join Date: Feb 2020
Location: Indianapolis IN
Posts: 255
I agree with Ember. Make sure to tape it with 3M VHB tape.
If not, it will fly off at 100mph and shatter into a million pieces. Don't ask me how I know.
BrandanK is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:04 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.