08-06-2019, 12:45 AM | #1 |
NOXQCES ZL1
Drives: 2017 Camaro ZL1 Join Date: Mar 2019
Location: Huntsville AL
Posts: 307
|
Gen 6 ZL1 CAT Delete Test Pipes
Suggestion for a good primary CAT removal test pipes. Really like the CA Performance pipes, but they appear to have gone out of business.
Don’t want to cut the exhaust and would prefer a direct CAT replacement. Open to suggestions and hearing about experiences. |
08-06-2019, 06:56 AM | #2 |
Drives: 2018 ZL1 1LE - HBM, PDR Join Date: Jun 2017
Location: Rescue, CA
Posts: 324
|
Have you checked out New Era Performance?
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
|
08-06-2019, 09:46 AM | #3 |
NOXQCES ZL1
Drives: 2017 Camaro ZL1 Join Date: Mar 2019
Location: Huntsville AL
Posts: 307
|
|
08-06-2019, 12:28 PM | #4 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Unfortunately they are the only game left in town.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
08-06-2019, 02:26 PM | #5 |
NOXQCES ZL1
Drives: 2017 Camaro ZL1 Join Date: Mar 2019
Location: Huntsville AL
Posts: 307
|
|
08-06-2019, 04:43 PM | #6 |
Drives: 2018 ZL1 1LE - HBM, PDR Join Date: Jun 2017
Location: Rescue, CA
Posts: 324
|
Hellion makes a set of delete pipes, but I don’t think they advertise. I have a new spare set laying around but again, they are like the New Era pipes and would need to be cut and fabbed up with a connection points (slip on the driver side and flange on the passenger side) at the secondary cats. You might contact them. Maybe they make a primary delete only that bolts right up.
Other than that, I think your left with fabricating something.
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated
|
|
|
Post Reply
|
|
|