[900RFWN]

Is it the stealthbox with the W6? What amp do you have on it?

[puppykat33]

Originally Posted by 900RFWN

Is it the stealthbox with the W6? What amp do you have on it?

yes its the W6 and the amp i have is the one JL recommend to go with the stealth box XD600/1v2

[puppykat33]

Originally Posted by 900RFWN

Is it the stealthbox with the W6? What amp do you have on it?

that amp will fit in the flat tire foam thing under the floor with alittle trimming with a serrated knife if you dont want to fabricate a whole amp rack . i also put a lc2i on it

[900RFWN]

Originally Posted by puppykat33

that amp will fit in the flat tire foam thing under the floor with alittle trimming with a serrated knife if you dont want to fabricate a whole amp rack . i also put a lc2i on it

The battery in the trunk is icing on the cake. Easy peasy. Thanks for the info.

[puppykat33]

Originally Posted by 900RFWN

The battery in the trunk is icing on the cake. Easy peasy. Thanks for the info.

no prob i also used the ST wiring harness so no wires were cut. all in all it can go back to factory verry quick and easy. i did buy another left side trunk liner since you half to cut a hole in it for the stealth box. i wanted to be able to return the car to factory if need be

[900RFWN]

I don’t plan on cutting anything up either. I knew that Bose was a PIA but learned yesterday that it’s more than I thought initially. I was eyeing this site for T harnesses and LOC/DSPs.

https://lljcustoms.com/store/ols/pro...-amp-t-harness

I’ll end up having to use a better module to interface though. Might as well do it right the first time.

[puppykat33]

Originally Posted by 900RFWN

I don’t plan on cutting anything up either. I knew that Bose was a PIA but learned yesterday that it’s more than I thought initially. I was eyeing this site for T harnesses and LOC/DSPs.

https://lljcustoms.com/store/ols/pro...-amp-t-harness

I’ll end up having to use a better module to interface though. Might as well do it right the first time.

The S T harness is blank with the speaker leads out for you to use so you can add whatever line out converter you want to it

[900RFWN]

Originally Posted by puppykat33

The S T harness is blank with the speaker leads out for you to use so you can add whatever line out converter you want to it

I was thinking about using the T harness initially but from my understanding the Bose system will still send an uneven signal and cause audio anomalies. Including different equalization based on volume level and will introduce sub frequency roll off despite the harness and LOC.

[2004YZFR1]

Originally Posted by puppykat33

The S T harness is blank with the speaker leads out for you to use so you can add whatever line out converter you want to it

I didn’t know about this company. I bought the harness from subhump and it’s more expensive and they charged about $17 to ship it. Which is excessive.

[puppykat33]

Originally Posted by 2004YZFR1

I didn’t know about this company. I bought the harness from subhump and it’s more expensive and they charged about $17 to ship it. Which is excessive.

thats the one im talking about Sub Thump = S T...
the whole bose system will max volume around 55% of the level so the bass roll off is handled by the lc2i. if you are amping all of your speakers i would reccomend daisy chaining the amps but getting the amped signal back to all speakers is going to be a monumental task. I am picky but with just the stealth box and correctly tuning the amp and lc2i the system really does sound great

[puppykat33]

well if you use the lc2i there is a high and low output on it so you can run your sub amp and your other of the high output. the accubass fixes the roll off

[RLNTLSS]

Originally Posted by 900RFWN

I was thinking about using the T harness initially but from my understanding the Bose system will still send an uneven signal and cause audio anomalies. Including different equalization based on volume level and will introduce sub frequency roll off despite the harness and LOC.

The t harness just taps in the signal wire of the bose amp and gives u the proper (+. - )output. Bose figured miss matching wires would keep people from fooln with ther systems..and the t harness correctly fixs the connection to the amp from the bose..Wiring capability..the lc2i..is the butter of all this u can keep the boom constant with no roll off.. and have proper connects to amp and get the signal needed for clean install and soundstage

[900RFWN]

Do you folks with the LC2i have your sub amp plugged in to the ‘main’ RCAs? I’ve heard a lot of people complain about the accubass not being accurate and randomly adding way too much bass without even touching the ACR-1.

[2004YZFR1]

Originally Posted by 2004YZFR1

I didn’t know about this company. I bought the harness from subhump and it’s more expensive and they charged about $17 to ship it. Which is excessive.

https://lljcustoms.com/store/ols/pro...-amp-t-harness

This is the company that I didn’t know made adapter harness set ups. I would have gone with them instead.