04-07-2020, 03:16 PM | #1 |
Long hauler
|
Illuminated Door Sill Plate Wiring Harness - Now made own harness
I’ve bought a pair of the uplevel illuminated door sill plates and just realized the OEM kit includes a harness with the sill plates. Was wondering if anyone knew either the part number for the harness or another way to wire up the sill plates?
They are the OEM sill plates with the connectors but no harness. I see the part number for the sill plates are 84127636 and/or 84127637 but can’t find the harness by itself Last edited by Bumbleboy92; 04-13-2020 at 08:54 PM. |
04-07-2020, 04:30 PM | #2 |
Drives: 2017 HBM 2LT RS Convertible V6 A8 Join Date: Jan 2018
Location: NJ
Posts: 654
|
Check this thread
https://www.camaro6.com/forums/showt...nterior+lights I think you can tap in here, but if you can build youself a simple harness you can save a few bucks. |
04-08-2020, 03:19 PM | #3 | |
Long hauler
|
Quote:
|
|
04-08-2020, 05:39 PM | #4 | |
Drives: 2017 HBM 2LT RS Convertible V6 A8 Join Date: Jan 2018
Location: NJ
Posts: 654
|
Quote:
Tapping into the circuit was the easiest part. I'm pretty sure that's the same one you want for the door sills; on when the doors open and timed fade off when closed. |
|
04-10-2020, 10:16 PM | #5 |
Drives: 2016 Camaro RS Join Date: May 2016
Location: Louisiana
Posts: 392
|
I used my own wire as well and looked at the harness instructions. On the passenger side is a grounding screw already. And you actually can tap the same place the oem harness does
__________________
2016 Summit White 1LT RS, Brembo Brakes, NPP Exhaust,Front Glowtie, Rear Red Glowtie, Adrenaline Red Interior
|
04-13-2020, 07:36 PM | #6 |
Long hauler
|
I just got my sill plates today and using all the links you guys provided I made what I think is the equivalent of the OEM harness and it works!
(Ignore the flickering, I accidentally kept missing the pos/neg on the 9V) DIY harness in action I’m gonna wait for homedepot to open tomorrow to get some heat shrink and probably a bigger ring terminal size to fit the OEM grounding screw as Oramac2016 said |
04-13-2020, 08:13 PM | #7 |
Drives: 2018 Chevrolet Camaro RS Join Date: Mar 2019
Location: Lafayette, Indiana
Posts: 119
|
I ordered the parts and had the dealership install them. Door sills came with the required harness. I'd have thought yours would as well.
|
04-13-2020, 08:31 PM | #8 | |
Long hauler
|
Quote:
Got the sill plates from a FaceBook member for $80 and realized he didn’t have the harness mid shipping |
|
04-15-2020, 09:21 PM | #9 |
Long hauler
|
|
09-07-2023, 10:09 PM | #10 | |
Drives: Camaro SS Join Date: Sep 2022
Location: St. Louis
Posts: 4
|
Quote:
|
|
09-08-2023, 12:02 AM | #11 | |
Long hauler
|
Quote:
https://www.camaro6.com/forums/showthread.php?t=468669
__________________
|
|
|
|
Post Reply
|
Tags |
door, illuminated, sill plates, wiring harness |
|
|