04-23-2021, 06:37 PM | #1 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Ugh, broke a stupid part - Glove box area
Hey,
I was dropping down my glove box and forgot to undo the dampener string. I ripped the string out of where ever it comes from and now I need to replace the assembly. Can anyone help me with pointing out where that strings goes and the replacement assembly? Is it is this? https://www.gmpartsdirect.com/oem-pa...pport-23238786 When I search for 2017 camaro it doesn't come up but that kinda looks like the thing behind the glove box. Appreciate any help!
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
04-23-2021, 07:52 PM | #2 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,583
|
The GM catalog says that part is not compatible, but 23498323 is. Other than that it's probably what you need, at least the name matches. Will try to check the 2018 service manual later, in case it has more info.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
04-23-2021, 07:58 PM | #3 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
I looked at replacing it and it appears the whole dash comes out :(
I think I will be dealing with a slightly less fancy of a glove box
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
04-23-2021, 09:26 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,583
|
Nah, although there isn't much info in the service manual either, it does say you can get by removing only the (dreaded) lower cover under the glove box, check this out.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 Last edited by arpad_m; 04-23-2021 at 10:37 PM. |
|
|
Post Reply
|
|
|