04-04-2016, 08:01 PM | #1 |
What is your best 0-60 time stock?
So I tried using the built in 0-60 timer today and was a bit disappointed in my results. I ran it three times and my best run was 5 seconds flat. Does anyone have any tips to achieve better times? My understanding is these cars will do 4.0-4.2 0-60.
Location: Hawaii Temperature: 77 degrees Run 1: 5.1 secs TCS off/Track Mode/Stabiltrak off (Didn't load) Run 2: 5.0 secs TCS off/Track Mode/Stabiltrak off (launched at 2500 RPMs) Run 3: 5.0 secs TCS on/ Track Mode/Stabiltrak on (Didn't load)
__________________
2016 Camaro SS, Summit White, A8, MRC, Rally Stripes, Black Bowties.
|
|
04-04-2016, 08:04 PM | #2 |
Drives: Want a gen 6 Join Date: Jan 2013
Location: 75089
Posts: 1,032
|
The manual says 1/2 throttle until 35mph, then full throttle.
Did you try that? |
04-04-2016, 08:14 PM | #3 |
That may explain it. I went full throttle the entire way.
__________________
2016 Camaro SS, Summit White, A8, MRC, Rally Stripes, Black Bowties.
|
|
04-04-2016, 08:27 PM | #4 |
Drives: Want a gen 6 Join Date: Jan 2013
Location: 75089
Posts: 1,032
|
Of course they are trying to keep you out of the ditch, so really I think you should use half throttle as a starting point. Then add throttle to the edge of adhesion, where the tires let out like three light chirps to 35mph, then floor it. Also not all surfaces can produce good times, shop around and look for a road that can handle more throttle earlier with TCS off/Track Mode/Stabiltrak off.
|
04-04-2016, 08:52 PM | #5 |
Drives: 16 2SS Join Date: Jan 2016
Location: Ft Knox, ky
Posts: 199
|
I tried today as well. Got it to 5.1 with a fair amount of wheel spin. Attempted launch control, is there supposed to be a message that says "launch control ready" or something? Only message I saw was when I put it into competitive mode. I'm pretty sure launch worked... I had clutch to the floor, wheel straight, floored it revs settled at about 35 and quickly let the clutch out (didn't side step it). I didn't get an actual time on the launch run, had a different screen up instead of the timer. The 5.1 was with all traction control on, just a user induced launch.
__________________
2/3/16 Ordered #TFKDC9
3/23/16 Took delivery! Hyper Blue 2SS, Jet black int, NPP, MRC, 6MT, 56V rims, NAV, Sunroof, Black Bow ties, painted engine cover, black tail lights and side markers, Lime green calipers, custom painted SS badges, Stillen body kit, Borla ATAK and Cat delete Xpipe |
04-04-2016, 09:22 PM | #6 |
The BEAST
Drives: '16 2SS, '89 Wife Join Date: May 2015
Location: Central Coast, CA
Posts: 2,034
|
4.7 without any assists. With the launch control i got a 4.8. Thats cool to me lol.
__________________
|
04-04-2016, 09:23 PM | #7 | |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
I can get consistent 4.0 or better...
waiting on tune and cat delete... this is a zero to 80 run (top of 2nd).
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
04-04-2016, 09:32 PM | #8 |
Drives: 16' Supercharged 1SS Join Date: Apr 2014
Location: Scottsdale, AZ
Posts: 650
|
4.6 seconds on a cold night without warming up my tires and traction control on and only in sports mode.
|
04-04-2016, 09:39 PM | #9 |
Drives: Camaro 2017 1LE Join Date: Feb 2016
Location: Atlanta
Posts: 1,154
|
i used to get that with a 97 supra turbo, dam i hope it runs 4.3 at least with a decent manual driver...... how else can we smoke the new GT
|
04-04-2016, 09:42 PM | #10 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
it has already been tested at 4.0 flat, a decent manual driver will beat that...
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
04-04-2016, 09:42 PM | #11 |
Drives: 16' Supercharged 1SS Join Date: Apr 2014
Location: Scottsdale, AZ
Posts: 650
|
|
04-04-2016, 09:58 PM | #12 | |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
Quote:
here you go a light M6 http://www.motortrend.com/news/2016-...rd-mustang-gt/ 0-60 4.0
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
04-04-2016, 11:04 PM | #13 |
Drives: Too many Join Date: Mar 2016
Location: NJ
Posts: 47
|
|
04-04-2016, 11:14 PM | #14 |
Drives: . Join Date: Dec 2015
Location: Michigan
Posts: 256
|
|
|
|
Post Reply
|
|
|