01-17-2019, 05:48 PM | #1 |
Drives: ZL1 ATS-V CTS-V C7Z Range Sport SC Join Date: Mar 2016
Location: Cincinnati, OH
Posts: 580
|
Who wants the Corvette ZR1 Style Wing with ZL1 1LE Brackets?
Since I'm making both of these, I thought why not make the ZR1 style ZTX wing with the ZL1 1LE brackets for a direct bolt on solution? I'll be making the larger front splitter too. The ZL1 has 350lbs downforce at 155 MPH and the ZR1 ZTK has 900lbs. I've talked to quite a few of you track guys and the general consensus is the car could use some more downforce. So, you can do the front, the rear, or both depending on your driving style!
I already have it modeled, just need to see if there is interest to make it! |
01-17-2019, 07:30 PM | #2 |
Drives: 2018 SS 1LE Join Date: Jan 2019
Location: Pittsburgh
Posts: 9
|
I would love a wing for an SS 1LE that bolted up to our trunk lids. From what I can tell no one makes a wing for the SS 1LE yet
|
01-17-2019, 07:48 PM | #3 |
BYND GARAGE
Drives: 17' 1LT Turbo Join Date: Feb 2016
Location: CA
Posts: 667
|
Would be dope! Do it!
__________________
|
01-17-2019, 07:54 PM | #4 |
Drives: 2018 SS 1LE, 2013 CTS-V Join Date: Feb 2018
Location: NH
Posts: 11
|
Interested for SS 1LE. Any pics of front splitter yet?
|
01-17-2019, 08:06 PM | #5 |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
|
I for one think it would look WAY better without the middle support, but who knows if that would put too much force on the outside ones... the APR wing only uses two, so why couldn't this?
__________________
IG: @NC_M1SS1LE
|
01-17-2019, 10:05 PM | #6 |
Drives: ZL1 ATS-V CTS-V C7Z Range Sport SC Join Date: Mar 2016
Location: Cincinnati, OH
Posts: 580
|
It could as the ZR1 only has 2 supports; however, that would leave a lot of guys with open holes in their deck lid
|
01-18-2019, 06:22 AM | #7 |
Drives: 2018 ZL1 1LE Join Date: Mar 2018
Location: Springfield, VA
Posts: 115
|
Definitely would be interested in this. I'd love to see a photo of the prototype installed once it's ready
__________________
2018 Chevy Camaro ZL1-1LE
2015 Silverado 2500HD 1999 Jeep Cherokee Sport 1998 Dodge Viper GTS 1972 Pontiac GTO 1963 Chevy C10 short bed, T5, 350, lowered |
01-18-2019, 06:47 AM | #8 | |
Drives: 2017 SS 1LE Join Date: Mar 2016
Location: Monterey, CA
Posts: 2,474
|
Quote:
Personally it would’ be a problem for me since if I ever get a wing I will also get a CF trunk, so I will only be drilling the holes tht are needed. Food for thought for you guys, think this one would look WAY better with just two supports.
__________________
IG: @NC_M1SS1LE
|
|
01-18-2019, 07:42 AM | #9 |
Drives: 2018 SS 1LE Join Date: Aug 2018
Location: Indianapolis
Posts: 156
|
Why not just make the middle support optional? Comes with, but can be omitted and mounting holes under the middle of the wing can be plugged?
|
01-18-2019, 09:42 AM | #10 |
Drives: 2018 ZL1 Hyper Blue A10 Join Date: Jan 2018
Location: Covington LA
Posts: 646
|
|
01-18-2019, 11:08 AM | #11 |
Drives: ZL1 ATS-V CTS-V C7Z Range Sport SC Join Date: Mar 2016
Location: Cincinnati, OH
Posts: 580
|
|
01-18-2019, 12:31 PM | #12 |
CAMAROGRAPHY
Drives: White 2SS Coupe Join Date: Jan 2014
Location: Chicago Area
Posts: 47
|
Wow. Great job. Definitely curious. Very interested to see pics/video.
|
01-18-2019, 06:34 PM | #13 |
Drives: Fast and Loud Join Date: Apr 2018
Location: Las Vegas
Posts: 17
|
I’m interested. Would love to do a test of the stock ZLE wing and this at the track whenthe season starts up again. I have a M3 race car and that wing is basically in line with the roof. Never a bad idea to have more downforce.
|
01-18-2019, 10:03 PM | #14 |
Drives: 2018 Audi TT RS Join Date: Jan 2014
Location: Navarre, Florida
Posts: 1,915
|
I think it would really depend on what you have planned for up front. That much downforce, potentially at least, could really upset the balance of the car. If something up front can be aesthetically pleasing and balance out that downforce, then sure. But I am also one of the guys that does not want to get a whole new trunk lid for just the sake of accommodating a spoiler. I’ll consider it but, it adds to my end price for this conversion.
__________________
2018 Audi TT ▊RS
2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold |
|
|
Post Reply
|
Tags |
aero, spoiler, zl1 1le, zl1 wing, zr1 |
|
|