ACT Twin Disk Clutch

diirk · 10-28-2016, 11:19 AM

Advanced Clutch Technology (ACT) has my car for testing their new replacement twin-disk setup for the Gen6 Camaro.

I just thought I'd throw this out here now.

I'll add pics and details as soon as I get them.

Merc · 10-28-2016, 05:31 PM

Can't go wrong with ACT! I have had there twin disc in Pumpkin for years. Great clutch.

diirk · 10-28-2016, 11:32 PM

The clutch is in.
It's a Twin Disk HD Street Kit.
Rated for 875 tq at the crank.
Weighs in around 42lbs, IIRC.
I'll try to get more accurate info.
No part number available yet. Should be soon though.
This is the first one on the road as far as I know.

It is a lightened flywheel and does have a small amount of gear rattle at idle and under low speed load (surge rattle).
Engine revs noticeably faster. Car feels faster. It's hard to "break in" the clutch because its so fun. It was fun before, but more so now.

I'll try to answer questions if anyone has one. And I'll update this thread with thoughts and opinions.

BradfordCamaro · 10-29-2016, 04:00 AM

Sweet. Did they give you an idea of MSRP?

diirk · 10-29-2016, 12:29 PM

They typically run around $1300.
They did mention that the install was a little more difficult than usual requiring the sub frame being dropped.

AROD11889 · 01-06-2019, 02:05 PM

Wish I could have enjoyed it but I didn’t unfortunately.

10-28-2016, 11:19 AM	#1
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	ACT Twin Disk Clutch Advanced Clutch Technology (ACT) has my car for testing their new replacement twin-disk setup for the Gen6 Camaro. I just thought I'd throw this out here now. I'll add pics and details as soon as I get them. __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

10-28-2016, 05:31 PM	#2
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,291	Can't go wrong with ACT! I have had there twin disc in Pumpkin for years. Great clutch. __________________ My Build Thread Last edited by Merc; 10-28-2016 at 06:12 PM.

10-28-2016, 11:32 PM	#3
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	The clutch is in. It's a Twin Disk HD Street Kit. Rated for 875 tq at the crank. Weighs in around 42lbs, IIRC. I'll try to get more accurate info. No part number available yet. Should be soon though. This is the first one on the road as far as I know. It is a lightened flywheel and does have a small amount of gear rattle at idle and under low speed load (surge rattle). Engine revs noticeably faster. Car feels faster. It's hard to "break in" the clutch because its so fun. It was fun before, but more so now. I'll try to answer questions if anyone has one. And I'll update this thread with thoughts and opinions. __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

10-29-2016, 04:00 AM	#4
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Sweet. Did they give you an idea of MSRP? __________________

10-29-2016, 12:29 PM	#5
diirk Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Utah Posts: 713	They typically run around $1300. They did mention that the install was a little more difficult than usual requiring the sub frame being dropped. __________________ 16 2SS 6MT NPP White \| MRR \| ACT \| JBA \| SCT \| C7C 04 Ram 2500 CDT 4x4 Quad 91 Miata 1.8 Feal Wilwood Track Car 1morproject

01-06-2019, 02:05 PM	#6
AROD11889 Drives: 2019 Camaro ZL1 A10 Summit White Join Date: Nov 2013 Location: Miami, FL Posts: 230	Wish I could have enjoyed it but I didn’t unfortunately. Last edited by AROD11889; 01-06-2019 at 02:21 PM.

User Name		Remember Me?
Password