2017 Camaro SS 1LE w/ PDR, low miles & lots of extras $38,000

TEX1LE · 01-28-2021, 09:10 AM

FS: 2017 Camaro SS 1LE 1SS with PDR - $38,000 | Willing to sell car only for $35,500.

Location: 76063
9,353 miles
Title in hand
Don't need to sell please no low ball offers or trades

Engine/Exhaust
Texas speed camshaft
TSP 1-7/8” LTH w/ off road x-pipe
DSX flex fuel kit
Fuel lobe
TSP pushrod set
TSP dual spring kit
PRC Ti retainers
PRC spring seats
PRC valve seals
PAC .660 dual valve springs
Comp cams phaser blocks
TSP dod delete kit
GM LS2 lifter trays
GM LS7 lifters
Trunnion upgrade
Rotofab CAI
JLT catch can
MBRP Race Exhaust with added Magnaflow exhaust (Magnaflow added to meet sound requirement)

SUSPENSION:
Ground control camber plates
BMR lowering springs
BMR rear cradle lockout kit
BMR diff lockout kit
BMR rear upper/lower control arm bearings
BMR upper/lower trailing arm bearings
BMR front lower control arm bearings
BMR front radius rods bearings
GM differential tune

Misc:
ASC wicker bill
GM clear tail lights
DBA front rotors
Carbo tech pads – Front XP 12 / Rear XP 10

Off car will be included in sale:
BC forged RZ05 19x11 square setup (track wheels, will not pass cars n coffee inspection)
BMR front/rear sway bar with extra poly bushings
BMR adjustable upper control arms
BMR adjustable upper/lower trailing arms
BMR adjustable toe rods
Dash built custom harness bar
Driver/passenger Recaro SPG XL seats with Recaro seat cushions
Schroth 6 point harnesses both driver/passenger

JK001 · 01-28-2021, 12:30 PM

What a great set up! This is alot of car for the money!

TEX1LE · 01-28-2021, 01:22 PM

Thank you!!

Volat1LE · 02-03-2021, 02:08 PM

Any videos of the idle and do you have cam spec? Does it still cruise nicely in 6th with the cam? Also who tuned and what were the power numbers? Thanks

TEX1LE · 02-04-2021, 10:12 AM

I can take an idle vid and post it when I get a chance. I don't have the specs but it's a mild cam and there's no issues cruising in any gear. The install and tune was completed by Baily's Hyperformance and it put down 490 whp / 480 tq on a conservative tune.

TEX1LE · 02-04-2021, 04:15 PM

@Volat1LE, when you get a chance PM your email address the file is too large to attach here.

Natedawg · 02-10-2021, 02:33 AM

Is your car still available

backstroke3229 · 02-10-2021, 01:51 PM

What do you think of the BMR lowering springs? How did they affect the ride and handling of your 1LE?

TEX1LE · 02-12-2021, 04:21 AM

@backstroke - the springs didn't affect the ride or handling at all. I like them I think it looks a lot better than the stock ride height.

backstroke3229 · 02-12-2021, 03:23 PM

Good to know. Beautiful car - the blue is my favorite 6th gen color. Tasteful mods, too

pfreedma · 02-12-2021, 07:30 PM

Bump

TEX1LE · 02-13-2021, 07:38 AM

Thanks I appreciate it!

TEX1LE · 03-07-2021, 05:28 PM

Bump

Jbryant910 · 03-09-2021, 03:16 PM

Pm sent

01-28-2021, 09:10 AM	#1
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	2017 Camaro SS 1LE w/ PDR, low miles & lots of extras $38,000 FS: 2017 Camaro SS 1LE 1SS with PDR - $38,000 \| Willing to sell car only for $35,500. Location: 76063 9,353 miles Title in hand Don't need to sell please no low ball offers or trades Engine/Exhaust Texas speed camshaft TSP 1-7/8” LTH w/ off road x-pipe DSX flex fuel kit Fuel lobe TSP pushrod set TSP dual spring kit PRC Ti retainers PRC spring seats PRC valve seals PAC .660 dual valve springs Comp cams phaser blocks TSP dod delete kit GM LS2 lifter trays GM LS7 lifters Trunnion upgrade Rotofab CAI JLT catch can MBRP Race Exhaust with added Magnaflow exhaust (Magnaflow added to meet sound requirement) SUSPENSION: Ground control camber plates BMR lowering springs BMR rear cradle lockout kit BMR diff lockout kit BMR rear upper/lower control arm bearings BMR upper/lower trailing arm bearings BMR front lower control arm bearings BMR front radius rods bearings GM differential tune Misc: ASC wicker bill GM clear tail lights DBA front rotors Carbo tech pads – Front XP 12 / Rear XP 10 Off car will be included in sale: BC forged RZ05 19x11 square setup (track wheels, will not pass cars n coffee inspection) BMR front/rear sway bar with extra poly bushings BMR adjustable upper control arms BMR adjustable upper/lower trailing arms BMR adjustable toe rods Dash built custom harness bar Driver/passenger Recaro SPG XL seats with Recaro seat cushions Schroth 6 point harnesses both driver/passenger Attached Images Last edited by TEX1LE; 02-04-2021 at 04:19 PM.

02-04-2021, 10:12 AM	#5
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	I can take an idle vid and post it when I get a chance. I don't have the specs but it's a mild cam and there's no issues cruising in any gear. The install and tune was completed by Baily's Hyperformance and it put down 490 whp / 480 tq on a conservative tune. Last edited by TEX1LE; 02-04-2021 at 04:26 PM.

02-10-2021, 01:51 PM	#8
backstroke3229 Joe Drives: 2004 Tahoe Z71, 2017 Camaro SS 1LE Join Date: Apr 2018 Location: Denver, CO Posts: 167	What do you think of the BMR lowering springs? How did they affect the ride and handling of your 1LE? __________________ 2017 Camaro SS 1LE: Kooks Catless Headers \| Corsa Sport Catback \| Rotofab \| E85 \| LT2 Intake Mani \| Tuned by Rickifast \| Apex SM-10's, 19x10 & 19x11 \| Side Skirts \| Mud Guards \| Wickerbill 2004 Tahoe Z71: Doug Thorley Tri-Y Catless Headers \| K&N \| Corsa Sport Catback \| E85 \| Tuned by Blackbear Performance 18x10 -24 Moto Metals \| 33x12.5x18's BFG K/O 2's \| Full Dynamat \| 2x10" Subs, 750W RMS \| 4x6.5's, 75W RMS

02-12-2021, 03:23 PM	#10
backstroke3229 Joe Drives: 2004 Tahoe Z71, 2017 Camaro SS 1LE Join Date: Apr 2018 Location: Denver, CO Posts: 167	Good to know. Beautiful car - the blue is my favorite 6th gen color. Tasteful mods, too __________________ 2017 Camaro SS 1LE: Kooks Catless Headers \| Corsa Sport Catback \| Rotofab \| E85 \| LT2 Intake Mani \| Tuned by Rickifast \| Apex SM-10's, 19x10 & 19x11 \| Side Skirts \| Mud Guards \| Wickerbill 2004 Tahoe Z71: Doug Thorley Tri-Y Catless Headers \| K&N \| Corsa Sport Catback \| E85 \| Tuned by Blackbear Performance 18x10 -24 Moto Metals \| 33x12.5x18's BFG K/O 2's \| Full Dynamat \| 2x10" Subs, 750W RMS \| 4x6.5's, 75W RMS

01-28-2021, 12:30 PM	#2
JK001 Drives: ZHP, Alfa 4C, RAM, X5, 17SS1LE-sold Join Date: May 2017 Location: East Coast Posts: 270	What a great set up! This is alot of car for the money!

01-28-2021, 01:22 PM	#3
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	Thank you!!

02-03-2021, 02:08 PM	#4
Volat1LE Drives: CA6 hopeful Join Date: May 2017 Location: Oregon Posts: 16	Any videos of the idle and do you have cam spec? Does it still cruise nicely in 6th with the cam? Also who tuned and what were the power numbers? Thanks

02-04-2021, 04:15 PM	#6
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	@Volat1LE, when you get a chance PM your email address the file is too large to attach here.

02-10-2021, 02:33 AM	#7
Natedawg Drives: 2015 camaro ss 1le Join Date: Jan 2021 Location: Virginia Beach, VA Posts: 6	Is your car still available

02-12-2021, 04:21 AM	#9
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	@backstroke - the springs didn't affect the ride or handling at all. I like them I think it looks a lot better than the stock ride height.

02-12-2021, 07:30 PM	#11
pfreedma Drives: 2021 Camaro SS 1LE Wild Cherry Join Date: Nov 2020 Location: Dyer, IN Posts: 55	Bump

02-13-2021, 07:38 AM	#12
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	Thanks I appreciate it!

03-07-2021, 05:28 PM	#13
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	Bump

03-09-2021, 03:16 PM	#14
Jbryant910 Drives: 2014 Malibu Join Date: Feb 2015 Location: Jacksonville, FL Posts: 41	Pm sent

User Name		Remember Me?
Password