02-08-2012, 12:03 PM | #1 |
Mrs. Bunny to you
Drives: Not a Camaro Join Date: May 2009
Location: Cut 'N Shoot Texas
Posts: 24,336
|
SSHR Q?
Getting ready for a big show this weekend. I did the works in this order - washed, clayed, SHR, Machine Polish, Brilliant Glaze and Buttery Wax. On the hood and trunk lid I used SSHR. I read over on the Adams forum that some guy said I should have gone over the SSHR with the SHR and I didn't, is that going to mess it up or make it look bad?
Last edited by bossbunny; 02-08-2012 at 12:20 PM. |
02-08-2012, 12:45 PM | #2 |
Drives: The shiny ones. Join Date: Mar 2010
Location: In the detail shop!
Posts: 5,979
|
The tendency is that Severe Swirl will leave some micro marring that Fine Machine Polish can't fully remove so the Swirl & Haze bridges that gap. I've skipped it before and been fine, comes down to the individual circumstances.
If you don't notice any hazing or micro marring left behind by the process then you're fine, don't sweat it. If you do see some minor imperfections the next time you are ready to detail just hit that spot with SHR followed by FMP. |
02-08-2012, 01:38 PM | #3 | |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,331
|
Quote:
__________________
|
|
02-08-2012, 01:40 PM | #4 |
Owning SSes for 50 Years
|
Nice car...good luck.
__________________
The new ride: 2023 Camaro, LT1, Sharkskin Grey
Previous Performance Cars: 1966 Chevelle SS 4M, 2010 Corvette 6M 1968 Dodge Charger R/T Auto 2012 1SS 6M 1982 Corvette Auto 2010 1SS 6A 1984 Corvette Auto 2016 2SS 8A 1999 Camaro Auto 2017 HBM 1SS 1le 2002 C5 Corvette 6M 2018 2SS 2006 Corvette Auto 2023 Camaro LT1 |
02-08-2012, 02:37 PM | #5 |
Mrs. Bunny to you
Drives: Not a Camaro Join Date: May 2009
Location: Cut 'N Shoot Texas
Posts: 24,336
|
Thanks Dylan and Nuke!
|
02-08-2012, 07:22 PM | #6 |
Totally into it
Drives: '67 427vette/'11 Pacecar/'02 BMW ci Join Date: Feb 2011
Location: SW Ohio
Posts: 653
|
badgebunny, how about some pics?
__________________
____________________________________THERE MUST BE A SUPPORT GROUP FOR THIS ADDICTION. AM I IN THE RIGHT PLACE?
|
02-08-2012, 08:42 PM | #7 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,331
|
She will have PLENTY in a few days.....we are going to be in a TWO DAY show in the Goerge Brown Convention Center in Houston. Thats why she's got Daisy all spiffied up!
__________________
|
02-12-2012, 06:06 PM | #8 |
Montani Semper Liberi
Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010
Location: Masontown, WV
Posts: 4,841
|
man I need to move down south so I can clean SB year round, she is currently covered in snow :(
__________________
Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint |
02-12-2012, 10:44 PM | #9 |
Oreo
Drives: Summit White LT/RS A6 Join Date: Dec 2010
Location: Waco TX
Posts: 1,248
|
Man if I cleaned my car this thoroughly I would be freaknig out trying to avoid bugs on the way to the show
|
02-15-2012, 07:47 PM | #10 |
Drives: 2010 IBM Camaro 1LT/RS Join Date: Feb 2010
Location: Sanger,CA
Posts: 1,834
|
i'm going to order some of this stuff this week. Do i have to use a Machine or would it work just fine with out it?
__________________
CVC Fresno
|
02-15-2012, 07:50 PM | #11 |
Adam's Distributor
Drives: 1988 Base Coupe, 1991 Z28 Join Date: Jan 2012
Location: Orlando, FL
Posts: 91
|
Adam's has both Hand and Machine applied polishes...just depends on how good of results you are looking for. Check out the video's on their website and DO NOT be afraid of machine polishing. The results will melt your face off.
__________________
Florida's Distributor of Adam's Premium Car Care Products Same Prices and Fast Delivery Call or text at 407-257-9604 ~ Email at mike@xqizt-automotive.com ~ Facebook.com/XQIZTAUTO |
03-04-2012, 09:50 PM | #12 |
Drives: 2010 IBM Camaro 1LT/RS Join Date: Feb 2010
Location: Sanger,CA
Posts: 1,834
|
Just used Adams for the first time on Friday. I got a Porter Cable from them too and 9the hours later OMG
__________________
CVC Fresno
|
|
|
|
|