06-07-2019, 03:39 PM | #1 |
Drives: Chevy Chevelle Join Date: May 2019
Location: FL
Posts: 5
|
WTB PCV stuff, maybe stock intake tube
Doing an LT1 swap in my Chevelle and motor didn't come with the lines/etc that connect to the valve covers or the intake tube/ filter. I have a few filters on the shelf, but for the sake of simplicity with regards to hooking all this up and having a MAF sensor mount I was going to get things running with stock stuff before doing the CAI stuff.
Anyway, if anyone has taken their stock stuff off or knows where to get the PCV stuff let me know. I'm fine with making my own pcv, but I'm having trouble finding a good picture of what connects where. GM reusing the LT1 name means getting lots of useless results when searching. |
06-07-2019, 09:19 PM | #2 |
Drives: 2016 F150 Join Date: May 2019
Location: Michigan
Posts: 169
|
I have a stock intake with MAF sensor. I can send some pics tomorrow for you.
|
06-08-2019, 05:06 PM | #3 |
Drives: Chevy Chevelle Join Date: May 2019
Location: FL
Posts: 5
|
Cool. I have a new MAF, just nothing else from throttle body forward.
|
06-09-2019, 05:01 PM | #4 |
Drives: 2016 F150 Join Date: May 2019
Location: Michigan
Posts: 169
|
|
|
|
Post Reply
|
|
|