What did you do to your 6th Gen Camaro today?! - Page 245

Ctkizer · 06-29-2017, 09:07 PM

Installed ikon front splitter and mp concepts side skirts.

John20162SS · 06-30-2017, 07:03 AM

Quote:

Originally Posted by 16CamaroSS

New Shoes - Zito ZS05s - 20x9 w/25mm offset on front and 20x10.5 w/35mm offset on the back. Sporting OEM tires until they wear out.

Very nice

CruzySS · 06-30-2017, 07:17 AM

Installed new taillights. Look way better than the stock ones.

DenverTaco07 · 06-30-2017, 09:02 AM

Added a Little power

http://www.camaro6.com/forums/showth...=498849&page=2

BrandonBell · 06-30-2017, 01:37 PM

Did some taillights

craigss50 · 06-30-2017, 06:28 PM

Quote:

Originally Posted by DenverTaco07

Added a Little power

http://www.camaro6.com/forums/showth...=498849&page=2

Very nice. nothing like an additional 207 hp!

Drizzt ss · 06-30-2017, 09:35 PM

Changed the rear diff fluid at 4400 miles with ACDelco dexron 75w-90 from the dealer. Didn't find any metal at all but on the plugs was literal black sludge. It was the consistency of calking. Fluid was black as well. For $58 to me was well worth it and super easy. I couldn't find the torque specs for the plugs so I did 20ft/lbs.

Also asked the parts guy at the dealer how much the newly released gm intake was...$540, not including NY tax. Thank god for thatgmpartsguy, what a rip off at the dealer.

Neverenuff · 07-01-2017, 01:14 AM

got my OEM ZL1 spoiler and ACS ZL1 side rockers back from paint and installed them.

its hard to see the rockers. I need to take better pics tomorrow in the sun.
I'm still undecided on the ZL1 spoiler. I will eventually replace it with the ACS spoiler after I finish up some other work I'm getting done.

BowtieRocket · 07-01-2017, 08:09 AM

Do the rockers change how you get in and out of the car? Was wondering if they stick out too much as to interfere

craigss50 · 07-01-2017, 08:27 AM

Quote:

Originally Posted by Drizzt ss

Changed the rear diff fluid at 4400 miles with ACDelco dexron 75w-90 from the dealer. Didn't find any metal at all but on the plugs was literal black sludge. It was the consistency of calking. Fluid was black as well. For $58 to me was well worth it and super easy. I couldn't find the torque specs for the plugs so I did 20ft/lbs.

Also asked the parts guy at the dealer how much the newly released gm intake was...$540, not including NY tax. Thank god for thatgmpartsguy, what a rip off at the dealer.

That black sludge is finely ground metal and is why it stuck to the magnet. Mine had it as well at 1500 miles. I first thought they put a heavy grease on the ends of the plugs to catch the metal. I will probably do it again at 5000. BTW I got my fluid at Amazon. They also sell the pump for $9 that fits on the GM bottle.

Neverenuff · 07-01-2017, 08:50 AM

Quote:

Originally Posted by BowtieRocket

Do the rockers change how you get in and out of the car? Was wondering if they stick out too much as to interfere

they do stick out a little so they could get scuffed if you arent careful.

BowtieRocket · 07-01-2017, 09:21 AM

Probably have to clear wrap them if I decide to do them

keon718nyc · 07-01-2017, 09:25 AM

Today went to start my car and what do you know....Click, click, click ect. Battery dead. Jump started it, ran it for a while and back to normal so far. Gonna have to see if my battery is bad or what. Roadside assistance came in 20 minutes which helped but leaves me to wonder now WTF after only 17 months.

Glen e · 07-01-2017, 09:28 AM

Quote:

Originally Posted by keon718nyc

Today went to start my car and what do you know....Click, click, click ect. Battery dead. Jump started it, ran it for a while and back to normal so far. Gonna have to see if my battery is bad or what. Roadside assistance came in 20 minutes which helped but leaves me to wonder now WTF after only 17 months.

Happened to me exactly like that. Just once. But battery was flat. Replaced the battery , never a problem again however now the old batt is showing it's in perfect shape, after a load and voltage test. So I'm at a loss.....

06-29-2017, 09:07 PM	#3417
Ctkizer Drives: 2016 2LT RS convertible Join Date: Oct 2016 Location: Garden grove Posts: 87	Installed ikon front splitter and mp concepts side skirts. Attached Images Last edited by Ctkizer; 06-29-2017 at 09:19 PM.

06-30-2017, 07:17 AM	#3419
CruzySS Drives: 2016 Camaro 2ss Join Date: May 2017 Location: Annandale MN Posts: 588 View My Garage	Installed new taillights. Look way better than the stock ones. Attached Images

06-30-2017, 09:02 AM	#3420
DenverTaco07 Drives: 2017 SS 1LE, 2017 Volt, 2013 Pilot Join Date: May 2014 Location: Colorado Posts: 4,274	Added a Little power http://www.camaro6.com/forums/showth...=498849&page=2 Attached Images __________________ 2017 SS 1LE \| HBM \| Vortech V3-Si supercharger (620RWHP and 575ft lbs) \| PDR \| Black Bowties \| Illuminated Front Black Bowtie \| Illuminated Door Sills \| Smoked Tails \| vented seats mod

06-30-2017, 01:37 PM	#3421
BrandonBell Drives: Hyper Blue Metalic gen 6 Join Date: Dec 2016 Location: St louis MO Posts: 72	Did some taillights Attached Images

06-30-2017, 09:35 PM	#3423
Drizzt ss Drives: 2017 NGM 1SS MRC NPP Join Date: Feb 2017 Location: Long Island Posts: 234	Changed the rear diff fluid at 4400 miles with ACDelco dexron 75w-90 from the dealer. Didn't find any metal at all but on the plugs was literal black sludge. It was the consistency of calking. Fluid was black as well. For $58 to me was well worth it and super easy. I couldn't find the torque specs for the plugs so I did 20ft/lbs. Also asked the parts guy at the dealer how much the newly released gm intake was...$540, not including NY tax. Thank god for thatgmpartsguy, what a rip off at the dealer. __________________ Mamo PTB /Borla ATAK NPP /Carbon Fiber lip/ZL1 side skirts/ Black Bow ties/Husky Mats/ Mishimoto CC /BMR strut tower brace/ZL-1 License relocation/Rock guards

07-01-2017, 01:14 AM	#3424
Neverenuff Drives: '17 2SS A8 Nav NPP Join Date: Jul 2016 Location: Fort Worth,TX Posts: 87	got my OEM ZL1 spoiler and ACS ZL1 side rockers back from paint and installed them. its hard to see the rockers. I need to take better pics tomorrow in the sun. I'm still undecided on the ZL1 spoiler. I will eventually replace it with the ACS spoiler after I finish up some other work I'm getting done. __________________ 2017 Summit White 2SS \| A8 \| Nav \| MRR M017's \| Nitto NT555 G2's 285/30, 305/30 \| GM Strut Tower Brace \| Gloss Black GM Front Splitter \| GM Dark Tail Lights \| Black front Bowtie rear Bowtie delete \| Oracle LED Side Markers \| Roto Fab CAI \| SEMA grill \| Borla S-Type axle back \| Borla X Pipe/Mid Pipe w/2nd cat deletes \| Power Stop Z26 pads \| BMR sway bars & end links, upper/lower trailing arms, upper control arms, chassis braces \| ACS ZL1 style rockers \| OEM ZL1 rear spoiler \| ZL1 start button \| Mishimoto catch can \| ZL1 6 Pots w/2 piece 390mm rotors \| Valentine 1 hard wired \| Husky Liners \|

07-01-2017, 08:09 AM	#3425
BowtieRocket Drives: 2016 Camaro 2SS- M6 Join Date: Sep 2016 Location: Albuquerque Posts: 1,133 View My Garage	Do the rockers change how you get in and out of the car? Was wondering if they stick out too much as to interfere __________________ 2016 Camaro 2SS M6- Garage

07-01-2017, 09:21 AM	#3428
BowtieRocket Drives: 2016 Camaro 2SS- M6 Join Date: Sep 2016 Location: Albuquerque Posts: 1,133 View My Garage	Probably have to clear wrap them if I decide to do them __________________ 2016 Camaro 2SS M6- Garage

07-01-2017, 09:25 AM	#3429
keon718nyc Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016 Location: New York City Posts: 1,928	Today went to start my car and what do you know....Click, click, click ect. Battery dead. Jump started it, ran it for a while and back to normal so far. Gonna have to see if my battery is bad or what. Roadside assistance came in 20 minutes which helped but leaves me to wonder now WTF after only 17 months.

User Name		Remember Me?
Password