[yankee]

Originally Posted by mendocino

This is a thin and not expensive Nappa leather. It is easy to glue and stretch.
Only the door handles were painted.

Wooow, this is awesome man! I wish I could do that to my yellow

[ohyeahjay]

Originally Posted by Cheekster96

Finally a nice day here in Northern Maine. Too bad our roads suck and there are no places to really do more than 55mph. What to do? I crossed over into Canada and drove the Trans Canada Highway towards Fredriction. Nice roads. Just a nice leisurely drive with a couple of pulls. Did 124 miles round trip. Mostly 75mph with the cruise on. Got 28mpg going towards Fredriction with a tail wind and 24 heading back into the wind. I am good with that!
Felt really good. Just a relaxing drive, listening to some tunes, going thru the rolling hills and not having to worry about pot hole after pot hole.
Lee

That is an excellent trip, I would suggest taking the 102 from Fredericton to Nackawic, right along the river and the road is pretty good as well. PM me if you are ever in the Florenceville area

[Z0Tex]

Deleted my sound tube with a custom 3D-printed intake plug and firewall plug set. Designed by DIYGuy here on Camaro6 (files will be available on thingaverse soon for V6 and V8 cars). Friend of mine at work printed the parts in ABS for me. Excellent fitment and the bowtie on the intake plug is a nice touch!





This also allowed me to finally relocate my E2 catch can using the ALPHA1LE relocating bracket set.



Car sounds much better and more natural without the tube. There is now a more dramatic difference in exhaust modes (from inside) and since it is a 1SS, the craptastic stereo system sounds a little better since it no longer has to compete with the fake engine noise being pumped into the cabin with the exhaust closed.

[ItsChristianInHD]

Had to get my windshield replaced at work. Thank god for SafeLite and insurance.

[V8RWD]

Originally Posted by chutoyy

Finished up my headlight mod... Ignore the mess.

Here's ZKW-R clear lens and shield mod w/ Osram 66340 CBB.

Possible for you to repost? Would love to see.

[AdmAnt13]

Originally Posted by zr1chris

Looking good! Did this to mine last month. Went a bit thicker on mine though. 1.5" to be exact.

Can you link where you bought it? And I’m assuming there is a seam. How does that look?

[zts1986]

Installed my front and rear dash cam combo. Looks pretty slick and tidy!

[ItsChristianInHD]

Originally Posted by zts1986

Installed my front and rear dash cam combo. Looks pretty slick and tidy!

Been looking for one. What brand?

[zts1986]

Originally Posted by ItsChristianInHD

Been looking for one. What brand?

Crosstour CR900

I’ll post a review and some pictures next weekend. Leaving town for a week and I will see how the motion-detection works. Really simple setup, though. Had to run a cable between the front and rear cam so followed the same path for the power, then took the power into the trunk and hooked into the fuse box back there. Can only see about an inch of wire in the front and back right where you connect to the cameras.

[zr1chris]

Originally Posted by AdmAnt13

Can you link where you bought it? And I’m assuming there is a seam. How does that look?

Source.
https://www.metrorestyling.com/Avery...w900-436-o.htm

I placed the seam right where the wheel weights are so it's hardly noticable unless you are literally looking for it.

[mendocino]

Originally Posted by yankee

Wooow, this is awesome man! I wish I could do that to my yellow

You just need to buy a piece of yellow leather to make. It is not at all difficult!

[Homeless Junkie]

I ran the sh*t outta the car at the track, gassed her back up, went to Alice's, washed, polished, micro polished then waxed and last put the cover on. The car's tucked into bed, I mean garage til the next one!

[SnakeEyeSS]

Good news guys, our cars are impervious to Kia's.

[Mr_Jones]

Originally Posted by SnakeEyeSS

Good news guys, our cars are impervious to Kia's.

WOW... Just WOW!