[KMPrenger]

Congrats! This is so awesome.

Now we need someone skinny like me, with a 1SS auto coming (again like me) to hit the track and get into the 11s bone stock. lol

Don't count on me guys...I'll likely never make it to the track!

[ChocoTaco369]

Nice times. I'm waiting to see what Atco holds for this thing.

[trz174]

Welds on front

[ULTRAZLS1]

Originally Posted by trz174

Welds on front

You should go back with those on the front, 1/8 tank of gas and have your smallest friend drive lol.

btw...im not far from you I might come out to watch next time you go to the strip...milan right?

when do you plan on going back?

btw awesome car

[Tim Adams]

Originally Posted by trz174

We didn't have time to put the Weld wheels and M&H tires from the ZL1 on the front while at the track. So, we did a test fit and test ride today. The welds fit with about 1/8 clearance on the caliper. These are 6 piston Brembos so 4 pistons should be fine too. Tires were fine except they rub the rear of the inner fender well on the engine side when you turn all the way to the lock. Not likely something you would do on the drag strip. No issues with either rear or front on a 10 mile drive around town. Both wheels were the ones Weld recommended for a 2012 ZL1. I had them in the garage so I tried them. Here are the sizes:

Front: Weld RT-S, 17x5 with M&H 4.5/28.0/17 tires
Read: Weld RT-S, 17x9 with MT ET Streets, 295/45/17

I think I am in love. That looks amazing with those wheels. I ordered the same thing minus the MRC and 6 piston brakes.

[Tim Adams]

Originally Posted by KMPrenger

Congrats! This is so awesome.

Now we need someone skinny like me, with a 1SS auto coming (again like me) to hit the track and get into the 11s bone stock. lol

Don't count on me guys...I'll likely never make it to the track!

Get it to a track. It is a blast.

[Sledgehammer70]

Impressive.... most impressive.

[Rockhead]

very impressive!

[Rockhead]

Mustang guys are saying that the slip car numbers don't match the numbers on the car
__________________
Quote:
Originally Posted by Black GT View Post
Couple months ago we a few of us were at the track playing with one of my buddies 2010 Z06 automatic.Between 4 of us NO ONE was able to get out of the 12's.

I believe torque managnent was killing us that night, when launching the car would take off and fall flat on it's face.

Z06 Automatic ????????

[American Legend]

Very impressive! I'll be sure to mention this feat today at work. It wasn't long ago when cars running 11's were only the ones trailered to the track. Amazing trz174!! Go team Camaro!!

[SS 1LE]

Originally Posted by Rockhead

Mustang guys are saying that the slip car numbers don't match the numbers on the car
__________________
Quote:
Originally Posted by Black GT View Post
Couple months ago we a few of us were at the track playing with one of my buddies 2010 Z06 automatic.Between 4 of us NO ONE was able to get out of the 12's.

I believe torque managnent was killing us that night, when launching the car would take off and fall flat on it's face.

Z06 Automatic ????????

They must be blind. Back window says 13, with the 1 towards the trunk and the 3 towards the roof. The number is facing you if you were standing on the passenger side.

Slips both say 13 as well.

What is the issue?

[huggercamaro21]

Originally Posted by SUMMIT WHITE SS

They must be blind. Back window says 13, with the 1 towards the trunk and the 3 towards the roof. The number is facing you if you were standing on the passenger side.

Slips both say 13 as well.

What is the issue?

Its an issue because its putting beating on their car.

[SSNYSTR]

Definitely should be able to get a lot better 60' on those tires.

[Jeffro19]

Awesome times!