07-09-2019, 12:08 PM | #1 |
Drives: 2016 Black 2SS + NPP + MRC Join Date: Sep 2015
Location: Atlanta
Posts: 270
|
Just went SS4 and Forged. What to expect?
I have a 2016 A8 SS. Headers, pray ported TB, pray ported IM, e85, CAI. I just ordered a GPI SS4 custom cam, am getting my stock heads ported, and ordered GPI's drop-in piston/rod set. What should I expect hp-wise? I also have a nitrous setup for 100 shot... just trying to set some expectations for the finished product. Anybody with a similar setup on or off nitrous, would love to hear your feedback.
|
07-09-2019, 12:19 PM | #2 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
You'll probably be around 550 to 570 before the nitrous shot. What manifold and throttle body do you have from Pray?
|
07-09-2019, 12:22 PM | #3 |
Drives: 2016 Black 2SS + NPP + MRC Join Date: Sep 2015
Location: Atlanta
Posts: 270
|
|
07-09-2019, 12:30 PM | #4 |
Drives: 2016 Camaro 2SS Join Date: Apr 2018
Location: Central Texas
Posts: 1,011
|
Your going to be leaving some power on the table then especially with that big of a cam wanting to breathe. Most cam cars are running the 95mm/msd combo to help with all the extra airflow coming in.
|
07-09-2019, 01:29 PM | #5 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,317
|
I'm a big fan of 1 and 7/8 headers but at your level 2" headers would add a good chunk of HP and even midrange torque...
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
07-09-2019, 02:17 PM | #6 |
Drives: 2016 Black 2SS + NPP + MRC Join Date: Sep 2015
Location: Atlanta
Posts: 270
|
|
|
|
Post Reply
|
|
|