You are browsing camaro6 
05-07-2020, 05:17 PM
|
#1 |
 
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
ATI pin kit
Just reading over the ATI damper instructions and see they call out the ATI crank pin kit. Is this something that is needed for our ZL1? Or is that for other engines??
|
|
|
|
05-07-2020, 05:37 PM
|
#2 |
|
I put an ATI balancer on my car... no pin kit here.
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
|
|
|
|
05-07-2020, 06:31 PM
|
#3 |
|
Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019
Location: NY
Posts: 537
|
I think it's just the LS engine
|
|
|
|
|
05-07-2020, 07:18 PM
|
#4 |
         
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
pin kit in an old school LS. It is needed because the crank did not include a keyway and the balancer could potentially slip on the crank snout. They included a jig to bolt to the crank and bit. Place a small cylinder of metal and done. The cylinder engages both the crank and balancer.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
