05-27-2020, 11:18 AM | #15 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,797
|
no just the front crank seal is good.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
05-27-2020, 01:40 PM | #16 |
Drives: 2018 Camaro SS 1LE Join Date: Jul 2018
Location: Stuttgart, Germany
Posts: 807
|
__________________
|
05-27-2020, 04:12 PM | #17 |
Drives: 2019 Camaro 2SS Join Date: Apr 2020
Location: Tewksbury MA
Posts: 39
|
My local auto store has that part so it worked out. Will put seal in and wait for the Mighty Mouse venter before I go anywhere near above 2500rpm. Should I throw the car on the dyno to double make sure the procharger can tune is good? I talked to them today and they still stand by there bulletproof tune. Or as soon as I get the can and seal on I should be good to go? Thank you.
|
05-27-2020, 05:52 PM | #18 |
Drives: 2019 Camaro 2SS Join Date: Apr 2020
Location: Tewksbury MA
Posts: 39
|
Used thst GM part number and got this, want to confirm it’s the right one. Thank you!
|
05-29-2020, 05:35 PM | #19 |
Drives: 2019 Camaro 2SS Join Date: Apr 2020
Location: Tewksbury MA
Posts: 39
|
Another question guys. Another builder here locally to me said there might’ve been a chance that the balancer was spinning, causing the seal to brake? And I would need a new crankshaft? Any thought on that?
|
05-29-2020, 06:07 PM | #20 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,749
|
Believe the factory crank/balancer are keyed, so your local builder is wrong if I’m correct.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
05-29-2020, 08:58 PM | #21 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,797
|
Josh is correct. The Factory balancer is key'd which is how Procharger gets away with using the cam lock pulley setup.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
|
|
Post Reply
|
|
|