12-04-2019, 11:17 AM | #1 |
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
Hoosier or M/T 275 60 R15
Anyone have input on which one I should go with? I cant believe I could not find a discussion on this.
|
12-04-2019, 11:40 AM | #2 |
BAMF SS
|
Depends on the setup. Hoosiers are lighter but mickeys are stickier. So if the Hoosiers hook for you, they will be faster. But the mickeys will hook on bigger hp builds or tracks with sub par prep.
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
12-04-2019, 01:59 PM | #3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
You can run the 325 MT as it will fit under your car and its basically the same height as the 275MT just a bunch wider. Gen6Mike is running it on his 8 second Camaro.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
12-04-2019, 08:50 PM | #4 |
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
Thanks guys. I'm looking for Gen6mike but haven't found him yet.
|
12-04-2019, 09:34 PM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
He's a buddy of mine and I just texted him earlier about the 325R, the only thing he did was move the wiring harness in the inner fender well of the drivers side. No rubbing on his 10" wheel.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
12-05-2019, 07:27 PM | #6 |
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
Thanks Greg, my harness has already been relocated. I have decided to go with the 325's Also will order a VFN cowl hood. I think it's going to look like a beast. Will post a pic when finished.
|
12-10-2019, 06:12 AM | #7 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Awesome Mark.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
|
|