2015 Z/28, Cammed, Longtubes, E85, Custom Painted Engine Bay - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Copper&Black · 04-14-2021, 06:11 PM

This is your chance to own one of the few. 2015 Chevrolet Z28, around 2000 made over the corse of 2014-2015. This car came from the factory with a LS7/427 6 speed manual transmission, racing dampeners and carbon ceramic brakes.

This car has never seen the track or been abused. It has PPF on the front bumper and quarters and Xpel stealth PPF on the hood, roof, and trunk lid/spoiler topside. It has a chevy performance wicker bill painted gloss black to match the car and ppf'ed as well. I ditched the stock GM Performance hardware and mounted the wicker bill using mirror polished Ring Brothers Hardware. The wheel and never been curbed and are sporting brand new (less then 200 miles) PSS 4s tires, 305 front, 325 rear

Now for the Modifications all done at Excell Auto Sport and Service / Excell Racing in Boca Raton. At 11,xxx miles the engine was cammed using a Brian Tooley Racing Cam, Stock heads worked to support the cam, valve guides, trunions etc. along with American Racing Header Longtube kit w/o cats into the stock dual mode mufflers. The car was dyno tuned after the modifications on their in house dyno.

Second round of Modifications came after another few thousand miles and included a customized and painted MSD intake, painted Holley LS7 valves covers, painted Nick William 102mm TB, painted custom intake tube. Also injectors, E85/Flex fuel sensor was added. So now the car can run on E85 or 93. Was dyno tuned and produced 593hp 540tq conservatively.

The stock clutch was replaced with a RPS twin disc carbon clutch with Tipton slave, and master cylinder to be able to handle the power without question.

All together I have about $15,000 in this car.

The only reason I am selling it is b/c I recently bought a C8 and I don't need two cars.

If anyone has any other questions please feel free to call or text me 954 804 4779. Ray@sjturbine.com

Milage 32,500
Price: $55,000
Clean Title in hand

https://youtu.be/8GCRZZynp2Q
https://youtu.be/c6SqLRTMvNA
https://youtu.be/09M9tFtKU7E

Copper&Black · 05-25-2021, 11:05 AM

Still Available, All stock parts included with car.

joesfast1 · 05-26-2021, 10:14 AM

Will this pass CA emissions?

ariZona28 · 05-26-2021, 11:07 AM

Quote:

Originally Posted by joesfast1

Will this pass CA emissions?

LOL!!! Pretty sure California prohibits the DISCUSSION of such a vehicle, much less it being able to pass smog check.

joesfast1 · 05-26-2021, 11:22 AM

Quote:

Originally Posted by ariZona28

LOL!!! Pretty sure California prohibits the DISCUSSION of such a vehicle, much less it being able to pass smog check.

It was worth a shot. Beautiful car!

96SS390 · 05-26-2021, 01:59 PM

My dream car. For me as a buyer it sucks these have gone up $10k+ in pricing since I was looking 2 years ago. Maybe I should sell my house and buy a trailer to get this.

1JEWLDSSRS · 05-26-2021, 07:18 PM

Quote:

Originally Posted by joesfast1

Will this pass CA emissions?

lol, if you read the mods, he said "no cats".. So notta gonna happen, you need to move to here!! lol.

gen=5 · 06-03-2021, 02:53 AM

You can always bolt some catts on it, plus the miss conception for many ppl is that catts hurt your power, and it’s not the case…all of these high hp cars come with HIGHFLOW catts, ..
They may nit be 100cel but still high flow, I’ve seen a 1400hp car only loose 15 hp with cats reinstalled, now catts on most trucks, tend to suck , or they used to up till about 2006 …

ecreps · 06-13-2021, 09:46 PM

Quote:

Originally Posted by gen=5

You can always bolt some catts on it, plus the miss conception for many ppl is that catts hurt your power, and it’s not the case…all of these high hp cars come with HIGHFLOW catts, ..
They may nit be 100cel but still high flow, I’ve seen a 1400hp car only loose 15 hp with cats reinstalled, now catts on most trucks, tend to suck , or they used to up till about 2006 …

It doesn't matter if it has cats or not, it isn't going to pass smog.

Awesome car, wish I was in the market for one.

300SRT · 06-14-2021, 07:42 AM

Quote:

Originally Posted by ecreps

It doesn't matter if it has cats or not, it isn't going to pass smog.

Awesome car, wish I was in the market for one.

Any facts to back this? 100% assumed fail rate then?

Sent from my SM-N970U using Tapatalk

Copper&Black · 06-20-2021, 08:24 PM

Sold!

04-14-2021, 06:11 PM	#1
Copper&Black Drives: Black 2015 Z28, Black 2013 GT500 Join Date: May 2015 Location: South FL Posts: 74	2015 Z/28, Cammed, Longtubes, E85, Custom Painted Engine Bay This is your chance to own one of the few. 2015 Chevrolet Z28, around 2000 made over the corse of 2014-2015. This car came from the factory with a LS7/427 6 speed manual transmission, racing dampeners and carbon ceramic brakes. This car has never seen the track or been abused. It has PPF on the front bumper and quarters and Xpel stealth PPF on the hood, roof, and trunk lid/spoiler topside. It has a chevy performance wicker bill painted gloss black to match the car and ppf'ed as well. I ditched the stock GM Performance hardware and mounted the wicker bill using mirror polished Ring Brothers Hardware. The wheel and never been curbed and are sporting brand new (less then 200 miles) PSS 4s tires, 305 front, 325 rear Now for the Modifications all done at Excell Auto Sport and Service / Excell Racing in Boca Raton. At 11,xxx miles the engine was cammed using a Brian Tooley Racing Cam, Stock heads worked to support the cam, valve guides, trunions etc. along with American Racing Header Longtube kit w/o cats into the stock dual mode mufflers. The car was dyno tuned after the modifications on their in house dyno. Second round of Modifications came after another few thousand miles and included a customized and painted MSD intake, painted Holley LS7 valves covers, painted Nick William 102mm TB, painted custom intake tube. Also injectors, E85/Flex fuel sensor was added. So now the car can run on E85 or 93. Was dyno tuned and produced 593hp 540tq conservatively. The stock clutch was replaced with a RPS twin disc carbon clutch with Tipton slave, and master cylinder to be able to handle the power without question. All together I have about $15,000 in this car. The only reason I am selling it is b/c I recently bought a C8 and I don't need two cars. If anyone has any other questions please feel free to call or text me 954 804 4779. Ray@sjturbine.com Milage 32,500 Price: $55,000 Clean Title in hand https://youtu.be/8GCRZZynp2Q https://youtu.be/c6SqLRTMvNA https://youtu.be/09M9tFtKU7E Attached Images Last edited by Copper&Black; 04-15-2021 at 07:11 PM.

06-03-2021, 02:53 AM	#8
gen=5 Drives: 13 ZL1 vert blac fastlane/LPE 750 Join Date: Jul 2011 Location: houston Posts: 1,312 View My Garage	You can always bolt some catts on it, plus the miss conception for many ppl is that catts hurt your power, and it’s not the case…all of these high hp cars come with HIGHFLOW catts, .. They may nit be 100cel but still high flow, I’ve seen a 1400hp car only loose 15 hp with cats reinstalled, now catts on most trucks, tend to suck , or they used to up till about 2006 … __________________ http://www.camaro5.com/forums/showthread.php?t=346589 CHECK OUT THE BUILDING OF MY RANCH FOR DISABLED VETS, COMPLETE WITH A GUN RANGE .

05-25-2021, 11:05 AM	#2
Copper&Black Drives: Black 2015 Z28, Black 2013 GT500 Join Date: May 2015 Location: South FL Posts: 74	Still Available, All stock parts included with car.

05-26-2021, 10:14 AM	#3
joesfast1 Drives: 2014 1LE Blue ray Join Date: Jul 2014 Location: San Diego Posts: 228	Will this pass CA emissions?

05-26-2021, 01:59 PM	#6
96SS390 Drives: 2006 BOM GTO Join Date: Jul 2018 Location: Chippewa Pa Posts: 278	My dream car. For me as a buyer it sucks these have gone up $10k+ in pricing since I was looking 2 years ago. Maybe I should sell my house and buy a trailer to get this.

06-20-2021, 08:24 PM	#11
Copper&Black Drives: Black 2015 Z28, Black 2013 GT500 Join Date: May 2015 Location: South FL Posts: 74	Sold!