12-03-2020, 07:52 AM | #1 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
2019 SS Matte ppf on front bar?
Getting ppf on the rockers tomorrow, I was thinking about having them also do the front black bar (to do the entire front end is ridiculous $$$).
Then I got to thinking, how would that look if I had them use a matte ppf instead of standard. Anyone ever do that? Thoughts?
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
12-03-2020, 08:13 PM | #2 |
Drives: 2020 1LE Join Date: Apr 2020
Location: MI
Posts: 88
|
It will look like this. Mine is a satin that matches the hood wrap pretty well, but you get the idea. Paint, not PPF.
Is your splitter and spoiler satin/matte or gloss? |
12-03-2020, 08:29 PM | #3 |
Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
They are all the 1LE satin... looks nice!
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
12-03-2020, 08:42 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Chrome, I know it's expensive, but your frontend and even your mirrors will get chipped up pretty bad over time. It only takes getting stuck behind one single bro dozer or 18-wheeler with no mudflaps for half a minute.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-03-2020, 09:05 PM | #5 |
Drives: 2020 1LE Join Date: Apr 2020
Location: MI
Posts: 88
|
I strongly support the decision to go satin on the center bar. (Obviously) With your splitter, spoiler, mirrors, wheels, and stripes, its a no brainer to me.
In fact, if you keep the gloss bar, I will forever question your decision making process. J/K you can't go wrong either way. Your car looks bad ass with the shock/black combo. |
|
|
Post Reply
|
|
|