12-19-2018, 06:57 PM | #57 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
R888Rs are not a very good tire, old R888s were a decent R comp to learn on and they served well as a rain tire but the R888Rs lost that rain capability. NT01s are definitely superior to these, but a very old design. But neither of these rank very high IMO.
Yes RE-71Rs have much better grip (ran consistent 1:48 at Fontana ROVAL in 265/35/18 on my Evo X street RE-71Rs) but poor size choices. The best balance of cost/grip DOT R comps for my Evo X were Hankook TDs in 285/30/18 square, but they only go up to 295/30/18--no 19s. The best DOT track tires for our cars are Hoosier R7s, but too costly and hard to find take-offs in 19". That's why I'm getting 18" track wheels in 11" square, same setup used on the Camaro GT4.R--cant be too bad if that's what they use. |
01-27-2019, 03:43 AM | #58 | |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,389
|
Quote:
Excellent thread btw!
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
|
01-27-2019, 09:12 AM | #59 |
Drives: 2018 ZL1 coupe Join Date: Nov 2018
Location: Prescott, Arizona
Posts: 589
|
|
01-28-2019, 11:45 AM | #60 |
Drives: ZL1 1LE Join Date: Oct 2016
Location: California
Posts: 1,297
|
Thunderhill, roughly a 1:55 lap.
__________________
|
01-28-2019, 08:16 PM | #61 |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,389
|
Thanks looks like you’re right on
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
01-28-2019, 08:29 PM | #62 |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,389
|
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
01-30-2019, 08:06 PM | #63 |
aka BeastZL1
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra Join Date: Dec 2017
Location: NC
Posts: 1,112
|
Following.....
Point of reference for Goodyear Supercar 3's (not R) on a normal ZL1 with -2.4 front camber, -1.6 rear camber: *7 track days and 5000 miles out of the fronts, Rears were replaced twice (same period) *A new set of Goodyear Supercar 3's (not R) resulted in a 2 second drop at Carolina Motorsports Park (1:49ish to 1:46ish)
__________________
|
01-30-2019, 08:10 PM | #64 | |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,018
|
Quote:
I was amazed at the grip level when my car was new and I hadn't done a track alignment yet. Looking forward to a new set with the track alignment from the beginning of their life.
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 |
|
01-31-2019, 12:56 PM | #65 |
Drives: C5 Join Date: Nov 2018
Location: Denver
Posts: 141
|
|
01-31-2019, 01:01 PM | #66 |
Drives: 2018 ZL1 coupe Join Date: Nov 2018
Location: Prescott, Arizona
Posts: 589
|
|
01-31-2019, 01:20 PM | #67 |
Drives: 22' Porsche PDK GT4 Join Date: Mar 2018
Location: Bay Area
Posts: 2,018
|
^^ THIS!!!
__________________
Current:
22' Porsche PDK GT4 (MCS 2-way remote dampers) Previous: 18' NFG 2SS 1LE (ZL1 1LE solid rear cradle bushings & Corsa Exhaust) 16' F80 M3 (Ohlin R/T Coilovers) 13' Audi TTRS (APR Stage 1, MSS Springs) 09' C6 Z06 08' E90 M3 06' 335i (KW V2 Coilovers) 03' C5 Z06 |
01-31-2019, 06:25 PM | #68 |
aka BeastZL1
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra Join Date: Dec 2017
Location: NC
Posts: 1,112
|
Correct. No change in tire type. Old factory normal ZL1's compared to new factory normal ZL1's. No change in tire type, just new vs. old.
PICTURE OF TIRES BEFORE REPLACEMENT (FRONTS) https://www.instagram.com/camarobeastzl1/p/BtEwo0LHLhn/ LINK TO TIRES https://www.tirerack.com/tires/tires...F1S3&tab=Specs
__________________
|
02-01-2019, 07:20 AM | #69 | |
Drives: 2013 C6Z06 Join Date: Nov 2016
Location: PA
Posts: 1,577
|
Quote:
|
|
02-01-2019, 11:42 AM | #70 | |
"M1SS1LE"
Drives: 2017 SS 1LE Join Date: Dec 2015
Location: Upstate SC
Posts: 2,906
|
Quote:
__________________
MJK3888 Instagram Link
|
|
|
|
Post Reply
|
Tags |
19" track tires for zl1, goodyear f1 3r, nitto nt-01, toyo r888r |
|
|