Roto-Fab Big Gulp Intake | 2017-19 ZL1 Camaro | JDP Motorsports

JDP Sales · 01-02-2019, 11:30 AM

Hey Camaro6!

JDP Motorsports is excited to offer the new bigger and better intake for the 2017-19 Camaro ZL1! We have personally tested the fitment on those systems and can guarantee it will work just right for your setup. The new Roto-Fab CAI is the best choice for anyone doing a high-horsepower 6th gen Camaro build!

Roto-Fab 6th Gen Camaro ZL1 Big Gulp Intake (10161074)

Roto-Fab big gulp series intake for the 2017-2019 Camaro ZL1 is designed to feed the ZL1’s air needs.

Roto-Fab’s innovative air box coupling method allows for solid mounting to the air box as the system transitions from their 6” air filter clamping surface. This coupling design also effectively seals out unwanted engine heat!

The air box seals effectively to the hood, allowing for maximum air filter size and air box volume! It also utilizes the full factory air inlet to ensure low IATs and maximize performance.

Standard hardware for this system includes a 5” to 4 ¼“ hose coupler for larger throttle bodies. 4” adapter is sold separately for the factory throttle body. Roto-Fab uses 100% silicone hose couplers to ensure lasting product quality!

This system also features a custom fabricated inlet elbow to maximize performance and airflow cross-section. Roto-Fab also incorporated an oversized breather port to further accommodate high-horsepower applications. Their polymer duct work is also effective in reducing heat transfer.

To fully take advantage of this modification, we recommend a CNC Ported Supercharger Snout with a Nick Williams 103mm Throttle Body. Please email us at sales@jdpmotorsports.com for details.

Note: Not for sale or use in California.

PRODUCT FEATURES:
- Innovative air coupling design for a solid mounting
- Air box seals effectively to the hood
- Includes all necessary hardware for a complete installation
- Requires custom tune
- 30+ RWHP gains!
- Made in the USA
- Free shipping to the Lower 48!

MSRP: $549.95
Sales Price: $539.95

WE INSTALL PARTS!!

If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day!

Cheers,

Kayla L.
801.545.4215
Sales@jdpmotorsports.com

JDP Sales · 01-08-2019, 02:44 PM

2 months until spring is here and the start of the race season

. Let us know if you need some work done before then to get you ready!

Cheers,

Kayla L.
801.545.4215

JDP Sales · 01-16-2019, 03:32 PM

We have these on the shelf ready to go

. Let us know if you would like one.

Cheers,

Kayla L.
801.545.4215

01-02-2019, 11:30 AM	#1
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	Roto-Fab Big Gulp Intake \| 2017-19 ZL1 Camaro \| JDP Motorsports Hey Camaro6! JDP Motorsports is excited to offer the new bigger and better intake for the 2017-19 Camaro ZL1! We have personally tested the fitment on those systems and can guarantee it will work just right for your setup. The new Roto-Fab CAI is the best choice for anyone doing a high-horsepower 6th gen Camaro build! Roto-Fab 6th Gen Camaro ZL1 Big Gulp Intake (10161074) Roto-Fab big gulp series intake for the 2017-2019 Camaro ZL1 is designed to feed the ZL1’s air needs. Roto-Fab’s innovative air box coupling method allows for solid mounting to the air box as the system transitions from their 6” air filter clamping surface. This coupling design also effectively seals out unwanted engine heat! The air box seals effectively to the hood, allowing for maximum air filter size and air box volume! It also utilizes the full factory air inlet to ensure low IATs and maximize performance. Standard hardware for this system includes a 5” to 4 ¼“ hose coupler for larger throttle bodies. 4” adapter is sold separately for the factory throttle body. Roto-Fab uses 100% silicone hose couplers to ensure lasting product quality! This system also features a custom fabricated inlet elbow to maximize performance and airflow cross-section. Roto-Fab also incorporated an oversized breather port to further accommodate high-horsepower applications. Their polymer duct work is also effective in reducing heat transfer. To fully take advantage of this modification, we recommend a CNC Ported Supercharger Snout with a Nick Williams 103mm Throttle Body. Please email us at sales@jdpmotorsports.com for details. Note: Not for sale or use in California. PRODUCT FEATURES: - Innovative air coupling design for a solid mounting - Air box seals effectively to the hood - Includes all necessary hardware for a complete installation - Requires custom tune - 30+ RWHP gains! - Made in the USA - Free shipping to the Lower 48! MSRP: $549.95 Sales Price: $539.95 WE INSTALL PARTS!! If you are looking to have work performed or have one of our packages installed on your vehicle, we have a facility in Sandy, Utah where we perform everything from bolt-on installations, Dyno testing/tuning and complete race car builds. Our install shop fills up fast, so please call us to set up an appointment. Our expert staff is eager to assist you. We appreciate your interest in our products and have a great day! Cheers, Kayla L. 801.545.4215 Sales@jdpmotorsports.com

01-08-2019, 02:44 PM	#2
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	2 months until spring is here and the start of the race season . Let us know if you need some work done before then to get you ready! Cheers, Kayla L. 801.545.4215

01-16-2019, 03:32 PM	#3
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	We have these on the shelf ready to go . Let us know if you would like one. Cheers, Kayla L. 801.545.4215

User Name		Remember Me?
Password