You are browsing camaro6 
03-27-2022, 04:19 PM
|
#1 |
 
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 271
|
ANC adapter !!!!!!!!!!!!!!!!!!!!
Thought I would share this for those still fighting that dreaded feedback sound when starting up and driving around below 70mph. So far so good for me........
https://www.amazon.com/Active-Cancel.../dp/B081D5T4HR |
|
|
|
03-28-2022, 10:29 AM
|
#2 |
         Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,180
|
The easiest (and free) fix is to just find the wiring harness index for your model, which is undoubtedly posted somewhere right here. Then cut just one of the wires for one of the mics. You could remove about 2 mm of wire so they can never touch again.
The system does a check for input from both mics. If it doesn't "see" both mics, it deactivates. |
|
|
|
03-28-2022, 06:25 PM
|
#3 |
|
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 271
|
For those that don't want to be cutting wires incase of resale and just not damage things this was the option I chose and thought I would share it. I actually had mines unplugged.
|
|
|
|
|
03-29-2022, 06:44 AM
|
#4 |
Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010
Location: Central MA
Posts: 642
|
Just unplug the mic in the door. Done. Free.
__________________
 2017 ZL1 Bright Yellow w/ black center stripe, 6 speed, CF gas door, PDR, Navi |
|
|
|
|
03-29-2022, 11:43 AM
|
#5 | |
|
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,180
|
Quote:
I'm not trying to be a smartass here. Usually the connection at the door jamb is an integrated harness and it is all taped up. At least back by the amp you can see the individual wire colors. |
|
|
|
|
|
03-30-2022, 06:54 AM
|
#6 | |
|
Drives: 2017 Bright Yellow ZL1 6spd Join Date: May 2010
Location: Central MA
Posts: 642
|
Quote:
__________________
2017 ZL1 Bright Yellow w/ black center stripe, 6 speed, CF gas door, PDR, Navi |
|
|
|
|
|
03-31-2022, 05:24 PM
|
#7 | |
|
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 271
|
Quote:
|
|
|
|
|
|
03-31-2022, 08:55 PM
|
#8 |
 Drives: Chevy Camaro Join Date: Apr 2020
Location: Wi
Posts: 384
|
The harness was actually cheaper getting it directly from the manufacturer than Amazon. I bought the same one a year ago
|
|
|
|
|
03-31-2022, 09:13 PM
|
#9 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,364
|
What exactly does it do?
|
|
|
|
|
04-01-2022, 07:55 PM
|
#10 | |
|
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 271
|
Quote:
|
|
|
|
|
|
04-02-2022, 08:26 AM
|
#11 | |
|
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,180
|
Quote:
The ANC system is there to reduce low frequency noise which sounds like a groan when the car speed is say 50 mph but the engine rpm's are only 1300 or so. The engine can handle that, and Chevy wants that to hit fuel economy targets, but some drivers may think the car is struggling. So they deploy this system (ANC) to limit the noise. One of these days I plan to unplug my Bose amp and see if I can hear this noise. The ANC is always on even if the stereo is off. If you install an aftermarket amp with sub, that introduces a signal path delay compare to the stock system. The ANC is basically tuned to the timing of the stock system to generate its interference signal. Put in aftermarket stuff and even a few milliseconds difference in signal path turns destructive interference into constructive interference. |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
