You are browsing camaro6 
04-14-2022, 06:57 PM
|
#1 |
|
Having FUN in the SUN...
Drives: 2022 M6 ZL1 1LE Join Date: Jan 2022
Location: San Diego CA
Posts: 1,048
|
NEED HELP WITH CODES AFTER MODS…
Hey team… after installing the mods in my signature I am getting the following codes. The think they are from the flex link kit but not sure how to test or fix…any help would be appreciated.
__________________
2022 M6 ZLE: Katech CNC Ported Blower + Ported Heads + 103mm TB + Oil Pump + C5R Chain + Valve Covers + Coil Relocation
TSP VVT and DoD Delete Covers + LME Chain Guide + DSX Billet Lid + ATI Damper + 9.17" Lower + 2.4" Upper + MM Wild CC Coated ARH + AWE Touring + Magnaflow Center X + E85 + MSD Coils + Banks iDash + JMS Booster + Synergy Fender Tank ALL the RED Rear End BMR Goodies + JRE Terminator Cam Package + Remote Tuning and Moral Support from TED @ JRE BMR Motor Mounts + DMS Front HX + FIC 30's + APEX SM.10's + 305/345 R888R's = 770rwhp 785rwtq @E50 13.5psi |
|
|
|
04-15-2022, 10:43 AM
|
#2 |
         Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,177
|
since you get 5 harnesses, I would make sure the right one was used:
Port 2 - Power-up Port 3 harnesses are used on the port 1 side – Harness #2, 4, 5 Harness 4: For GM LT and 6.2L Ecotech3 Engines, plugs directly into purge valve connector Harness 5: For GM LS Engines, plugs directly into purge valve connector Harness 2: Output, power and ground for Stand Alone ECU sounds like you need #4. The codes sound like the purge circuit is getting no signal. https://cdn.shopify.com/s/files/1/01...f?v=1594069931 |
|
|
|
|
|
|
|
Post Reply
|
|
|
