02-23-2020, 11:13 PM | #15 |
Drives: Camaro 1SS A8 Vert Join Date: Sep 2018
Location: Tx
Posts: 303
|
Let me know when ready to ship
|
02-24-2020, 08:15 AM | #16 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Yessir - I can make my own now so I can print on demand
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
02-24-2020, 08:26 AM | #17 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Just to clarify - how I ended up in this pickle is that I was having a conversation with my boss (I work for a large industrial distributor) and we were talking about 3D printing, I told him I had wanted to own one as I had some ideas for stuff I wanted to make for myself.
This led to a conversation "well the company has a department now that has some machines, you can email them a model and they can print stuff for customers - you could have them do it" So I did - they charged me a design charge ($50) to get the initial red part made, but printed it for nothing and sent it to me. Once I approved it, they told me there would be a $200 minimum order. I didn't really want to go backwards being it was a work thing - up until the point in which I found out they were struggling to make good parts. Once I dug further, I found out the department was just jobbing them out to other companies *rolling my eyes* I just went all in and bought a good printer (not a low end one - this is a all enclosed, heated chamber, high temp extruder, etc....) so I plan on doing a lot more parts on my own in the future. I will have the ability to make glass-filled nylon and carbon fiber prints.
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
02-26-2020, 06:28 AM | #18 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Sorry everyone - have been working with the machine manufacturer to get the parts dialed in. I am running what should be the last test part right now.
I do have several that have some blemishes on the outside perimeter that would never be seen once mounted if someone is needing one ASAP. I just want to have trying to make them look as good as possible
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
02-26-2020, 10:01 PM | #19 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
These are finally looking good enough to be used - sorry for the delay everyone. Please email me at 800mxz@gmail.com and I can begin the process.
I plan on shipping on Friday mornings each week until I get everyone taken care of. I have a regular job too LOL
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
02-28-2020, 09:11 PM | #20 |
Drives: 17 SS 1LE, 02 GTP Join Date: Jan 2017
Location: KS
Posts: 44
|
Email sent
__________________
2017 Mosaic Black Metallic 1LE
|
02-29-2020, 08:39 PM | #21 |
Drives: 2016 2SS A8 Convertible Join Date: Aug 2010
Location: Nashville, TN.
Posts: 194
|
Bring this up
|
03-02-2020, 09:27 PM | #22 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
I actually acquired a different high temp material today that has a matte finish, looks very similar to the factory plastic. On the last leg of its first print with it, but material looks very good
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
03-05-2020, 07:25 PM | #23 |
Drives: 2018 Camaro ZL1 Join Date: Feb 2011
Location: Midwest
Posts: 255
|
Great. If you can, post pics....
Sent from my SM-G960U using Tapatalk
__________________
AudioControl 2x LC6.1200, LC1.1500, Audison Bit One Virtuoso, Bit Play HD, Frogs, M650, JLA 12W6
|
03-05-2020, 09:01 PM | #24 |
Autobody Tech
Drives: 05 Chevy Z71 16 Camaro 2SS m6 Join Date: Feb 2020
Location: Evansville, IN
Posts: 33
|
I'll take one as well.
|
03-14-2020, 11:55 PM | #25 |
Drives: 17 SS 1LE, 02 GTP Join Date: Jan 2017
Location: KS
Posts: 44
|
Any updates? Would like to buy one.
__________________
2017 Mosaic Black Metallic 1LE
|
03-15-2020, 02:47 PM | #26 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
I have a couple that I haver shipped with no complaints so I assume they are working fine. I have probably 6-7 printed in the glossier material. The matte material ones - I believe the material I purchased was old shelf stock and it is stringy. They look good once the gage is in, but the inside of the pod has some imperfections. Like I said, can't see it once the gauge is in, but its still there.
I plan on ordering more of the HTPLA material that is "fresh" - just would want some demand as the material is 8x the cost vs the PETG that the shiny ones are made of If there is interest - shoot me a PM and I will get an email notification
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
04-09-2020, 03:45 PM | #27 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Picture of current version
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
04-10-2020, 01:44 PM | #28 |
Drives: 2016 Camaro 2SS, NPP, A8, FBO, E85 Join Date: Oct 2016
Location: Springfield,VA
Posts: 884
|
hi, im interested in buying one as well. im just about to purchase a AEM wideband. are you still selling these?
__________________
Well............ At least you tried. lol
|
|
|
Post Reply
|
|
|