CAGS (Skip Shift) eliminator? - Page 3

Bassment · 01-25-2016, 02:07 PM

I get skip shift indicator all the time, mainly when turning at a light from a stop. I never have been locked out of 2nd or 3rd though. I just gives me a warning on the HUD/dash to shift 1-4. Is there a way stop it from being on the HUD/dash?

BESTPL8 · 01-25-2016, 02:09 PM

I plugged a SLP skip shift eliminator P/N 21008 into my 2016 1SS and it worked like a charm, but anything that works on a 2015 TREMEC TR6060 should work on a 2016.

63falcondude · 01-25-2016, 02:10 PM

Quote:

Originally Posted by BESTPL8

I plugged a SLP skip shift eliminator P/N 21008 into my 2016 1SS and it worked like a charm, but anything that works on a 2015 TREMEC TR6060 should work on a 2016.

Good news! Thanks!

fastball · 01-25-2016, 02:43 PM

Quote:

Originally Posted by priusowners

I agree, but since I want to make Mods easy & reversible for those
here who've not been born undernearh a car:

The CAGS harness is easily accessible and completely plug and play. If you've plugged a mouse into your computer at any time in your life you can install the harness. It installs in less than a minute, and you can remove any time you want in under a minute.

You only have to go under the car because, well, it's under the car.

63falcondude · 01-25-2016, 02:51 PM

Will this work? http://www.ebay.com/itm/like/2515378...chn=ps&lpid=82

jaymsu · 01-25-2016, 03:47 PM

Quote:

Originally Posted by 63falcondude

Will this work? http://www.ebay.com/itm/like/2515378...chn=ps&lpid=82

http://www.camaro6.com/forums/showth...69#post8863069

Gen5DIY guys posted on tech section.
http://www.gen5diy.com/P-P-Harness5/...Shift-Harness/

This is the link to their CAGS bypass. I'm ordering now!!!

FREEDOM~~~~ (of shifting....)

63falcondude · 01-25-2016, 06:16 PM

Quote:

Originally Posted by jaymsu

http://www.camaro6.com/forums/showth...69#post8863069

Gen5DIY guys posted on tech section.
http://www.gen5diy.com/P-P-Harness5/...Shift-Harness/

This is the link to their CAGS bypass. I'm ordering now!!!

FREEDOM~~~~ (of shifting....)

Thank you!

Camaro36 · 03-09-2016, 09:07 PM

Quote:

Originally Posted by jaymsu

http://www.camaro6.com/forums/showth...69#post8863069

Gen5DIY guys posted on tech section.
http://www.gen5diy.com/P-P-Harness5/...Shift-Harness/

This is the link to their CAGS bypass. I'm ordering now!!!

FREEDOM~~~~ (of shifting....)

Did you install it and did it work fine?

LesBaer · 03-10-2016, 08:34 AM

I ordered one from Phastek yesterday after speaking to them over the phone. They confirmed that it worked if that helps you at all.

Camaro36 · 03-13-2016, 08:00 PM

Anyone that has already installed these on, does it also eliminate the warning message as well or just lets you shift into 2nd gear regardless?

Hopefully it doesn't show you the warning message after installing it cause that would be annoying

Stex · 03-13-2016, 09:21 PM

Quote:

Originally Posted by Camaro36

Anyone that has already installed these on, does it also eliminate the warning message as well or just lets you shift into 2nd gear regardless?

Hopefully it doesn't show you the warning message after installing it cause that would be annoying

Thank your local epa for the light...that would be the gov....t..That would be the gas qus tax ...that would be the gov....t...most have said the light stays? good luck...

fastball · 03-13-2016, 09:31 PM

Quote:

Originally Posted by Stex

Thank your local epa for the light...that would be the gov....t..That would be the gas qus tax ...that would be the gov....t...most have said the light stays? good luck...

Yes the light stays. The harness just kills the power to the actuator that slides the pin. The car's ECM still thinks it's activating CAGS and will display it.

To disable the display you need to reprogram the ECM.

63falcondude · 03-14-2016, 09:26 AM

Quote:

Originally Posted by Camaro36

Anyone that has already installed these on, does it also eliminate the warning message as well or just lets you shift into 2nd gear regardless?

Hopefully it doesn't show you the warning message after installing it cause that would be annoying

It will still show the message.

Camaro36 · 03-15-2016, 03:04 PM

Thanks guys.

01-25-2016, 02:51 PM	#33
63falcondude Drives: 16 Camaro, 11 Stryker, 00 Explorer Join Date: Dec 2015 Location: NJ Posts: 1,214	Will this work? http://www.ebay.com/itm/like/2515378...chn=ps&lpid=82 __________________ NGM, 2SS, 6MT, NPP, MRC, Nav, Kalahari, Grey Wheels 1100 12/14/2015 3000 1/8/2016 (TPW 2/1) 3800 2/1/2016 5000 3/5/2016

03-10-2016, 08:34 AM	#37
LesBaer FMPG Drives: 2016 2SS Join Date: Dec 2015 Location: CT Posts: 1,888	I ordered one from Phastek yesterday after speaking to them over the phone. They confirmed that it worked if that helps you at all. __________________ Ordered 3/8/16- NFG/Ceramic White, M6, MRC, NPP, 6 pots, blk blade, no sunroof, blk splitter, blk bow ties, dark tails, nav. ARH 1 7/8" ceramic coated full sys w/NPP; Maggie 9.2psi (85mm); Jannetty rough idle cam(TSP), tune and LT4 fuel system; Forgeline VX1 Black PVD (20x10,11); R88R 315's; ALPriority; BMR rear arms, bushings, DS loop; RF intake (red); nGauge 93 octane: 712rwhp, 654rwtq / E85 (E66 mix): 734rwhp, 674rwtq (SuperFlow Dyno)

01-25-2016, 02:07 PM	#29
Bassment Drives: 2016 Red Hot 2SS M6 Join Date: May 2015 Location: Ontario Posts: 468	I get skip shift indicator all the time, mainly when turning at a light from a stop. I never have been locked out of 2nd or 3rd though. I just gives me a warning on the HUD/dash to shift 1-4. Is there a way stop it from being on the HUD/dash?

01-25-2016, 02:09 PM	#30
BESTPL8 Drives: Hyper Blue 1SS Manual - SOLD Join Date: Jan 2016 Location: Ann Arbor, MI Posts: 19	I plugged a SLP skip shift eliminator P/N 21008 into my 2016 1SS and it worked like a charm, but anything that works on a 2015 TREMEC TR6060 should work on a 2016.

03-13-2016, 08:00 PM	#38
Camaro36 Drives: Camaro 2SS Join Date: Feb 2016 Location: Orlando Posts: 38	Anyone that has already installed these on, does it also eliminate the warning message as well or just lets you shift into 2nd gear regardless? Hopefully it doesn't show you the warning message after installing it cause that would be annoying

03-15-2016, 03:04 PM	#42
Camaro36 Drives: Camaro 2SS Join Date: Feb 2016 Location: Orlando Posts: 38	Thanks guys.

User Name		Remember Me?
Password