Cooled seats seemed to have stopped working. - Page 2

RCF · 06-13-2019, 07:10 AM

Quote:

Originally Posted by z28pat

Mine felt better once I pointed some air to my feet and then raised the seat a little as well

Maybe that’s why I don’t understand the posts about them not working very well. I keep my bottom and regular vents on all the time, and I keep the front portion of my seat tilted all the way up in the front.

SSport16 · 06-13-2019, 12:01 PM

Make sure you have the floor HVAC button on, so the air will blow underneath as well, works better with those vents/ducts on.

matt fe2o3 · 06-15-2019, 02:33 AM

Quote:

Originally Posted by PnCRedJwl2SS

Without stepping on the brake pedal, push the start button and release. Then push it again and hold for about 5 sec. Just about everything will turn on, as if engine were running.

Caution...don’t leave in this mode for extended periods as you’ll run your battery down!

Hmm. does not work to activate the seat fans....

Dysan911 · 06-15-2019, 06:58 AM

I'm not 100% sure about this car but my previous car had ventilated seats as well and there was a little removable dust filter you could pop off and clean periodically. I'm curious if these have them as well which could possible hinder airflow if they get dirty.

driven2exceSS · 06-15-2019, 08:04 AM

Question for those techy members, how do you get the ventilated driver seat to continue to work when you have removed the passenger seat out of the vehicle? Is it possible??

06-13-2019, 12:01 PM	#16
SSport16 Drives: 2016 Garnet Red Camaro 2SS Join Date: Jul 2015 Location: North Carolina Posts: 5,435	Make sure you have the floor HVAC button on, so the air will blow underneath as well, works better with those vents/ducts on. __________________ 2SS Camaro, Garnet Red, Adrenaline Red, NPP, MRC, A8, 5 Split Spoke Bright Silver Wheels (56W) 1100 Status - 7/24/15 (Ordered) 3800 Status - 10/13/15 (Built) 6000 Status - 12/22/15 (Delivered)

06-15-2019, 06:58 AM	#18
Dysan911 Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016 Location: Jacksonville, FL Posts: 930	I'm not 100% sure about this car but my previous car had ventilated seats as well and there was a little removable dust filter you could pop off and clean periodically. I'm curious if these have them as well which could possible hinder airflow if they get dirty. __________________ Former Ride: 17 Camaro 2SS, M6 - Fifty \| Procharger P1SC \| 3.7 Pulley \| Stage 2 IC \| Race Bypass \| DSX FF Kit \| JRE Custom E85 Flex Fuel Tune \| LT4 Fuel System \| JMS Voltage Booster \| MSD Plug Wires \| American Racing 1-7/8's LT Headers Full System Catback \| Baro Breakout Harness \| LT4 Map Sensor \| Katech Ported TB \| MMS Oil Catch Can \| 160 Thermo \| Solo Performance J-Pipes

06-15-2019, 08:04 AM	#19
driven2exceSS Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017 Location: MA Posts: 1,029	Question for those techy members, how do you get the ventilated driver seat to continue to work when you have removed the passenger seat out of the vehicle? Is it possible?? __________________ NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)

User Name		Remember Me?
Password