01-20-2016, 04:05 PM | #1 |
Drives: 2015 Z/28 Join Date: Jun 2011
Location: Rhode Island
Posts: 245
|
Seat Removal
When removing seats from the Z/28, is there an easy way to unplug the main harness from the car or do you have to unplug each sensor from the seat and remove the harness from the seat before taking the seat out?
pics attached |
01-20-2016, 04:33 PM | #2 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
No dont do that to the seat, see pic it slides out and comes with the seat.
|
01-20-2016, 05:47 PM | #3 |
Drives: 2015 Z/28 Join Date: Jun 2011
Location: Rhode Island
Posts: 245
|
Got it, Thanks for the help.
|
01-20-2016, 06:16 PM | #4 |
Drives: 2010 Camaro 2LT RS, 2009 GTR Join Date: May 2009
Location: Kansas
Posts: 2,559
|
Yep, once you get it out the first time it's super easy. I used a body panel remover to squeeze the tab to slide it out as it helped me out.
__________________
Build thread: http://www.camaro5.com/forums/showthread.php?t=152335
Photos: www.flickr.com/bradbeer GTR Instagram: @NoCrustGTR |
01-20-2016, 06:30 PM | #5 |
This is what the plug lock looks like when it's open it slides to unlock
__________________
"The walls are white, the track is grey, the grass is green, and the sky is blue... your job is to keep them all where they belong." - Johnny Rutherford |
|
01-20-2016, 06:39 PM | #6 |
Drives: 2015 Z/28 Join Date: Jun 2011
Location: Rhode Island
Posts: 245
|
Its a tricky one, haven't run into that type of clip before. That's what I like about being a year or two late to the party on the Z, you guys have already torn these cars apart.
|
01-20-2016, 06:47 PM | #7 |
Drives: 2013 Camaro ZL1 Join Date: Dec 2012
Location: Dallas, Texas
Posts: 2,155
|
The first time I tried to do it I was so frustrated. I just happened to pull on it and noticed it slid out a little bit. I pulled on it, and then voila!
|
|
|
|
|