06-22-2019, 07:20 PM | #1 |
Single turbo lt1
Hello this is my single turbo lt1 its going on the dyno Monday ill post results then its SBE just a custom single turbo kit installed..
With that being said I'm looking at what's next to do that isn't heads/cam or rotating assembly, would I be ok to run meth with this sbe? |
|
06-22-2019, 07:30 PM | #2 |
06-22-2019, 08:44 PM | #3 |
2016 loaded 2SS
Drives: Maverick X3 Turbo R Join Date: Feb 2015
Location: United States
Posts: 242
|
get the thing some fuel..
any pix of your hotside? do you drive with your windows up or with earplugs? lol edit: not sure if you considered it or not; but one of those protection rings would look pretty sweet on the fender. double points if it's accompanied by a teardrop
__________________
|
06-22-2019, 08:59 PM | #4 |
Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
Lots more fuel and e85. Converter and a drag pack.
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
06-22-2019, 09:00 PM | #5 |
Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
What turbo?
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
06-23-2019, 05:45 AM | #6 |
06-23-2019, 05:47 AM | #7 |
06-23-2019, 06:23 AM | #8 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Cool build, but that A10 conversion might be a tough one to do.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
|
|