What did you do to your 6th Gen Camaro today?! - Page 323

driven2exceSS · 01-27-2018, 05:57 PM

Finally installed both the Pray ported stock IM, and Dry RotoFab!! Then what? I couldn't resist test driving... Temps a lil on the cool side for the tires to really get into throttle much from a stop, roads had residual salt and snow melt run-off too. Otherwise sounded and felt strong! Now it needs a nice bath, damn-it!

Cgocifer · 01-27-2018, 05:57 PM

Installed Powerstop brake pads. They are awesome!! Almost no dust and didn't notice any difference in stopping power. The car used to be covered in black dust even after short drives. Now, nothing even after some really hard stops bedding the pads in. Woot!!

Booher · 01-27-2018, 06:04 PM

I've been trying to get some stuff done to my car before a camaro event I was just in called camaros on the bridge. They shut down the London bridge for a little bit and let us park there. Anyways, I put on diode dynamic blacked out side markers, un badged the ss' s, painted the calipers with a matching paint with color code, put in the blacked out tails and third brake light, some led bulbs, and put some tint on my rear bumper reflectors. I even did the back sides of the calipers, just because lol. I even stuck on some jam handles to try them out, and they are pretty badass!

Doug kj6aco · 01-27-2018, 08:29 PM

San Diego Camaro Club had a coastal run from Carlsbad down the coast hwy 101 to Moonlight Beach, Mt Soloda, Cabrio Monument, and than to a local burger joint fun time had by all.

1hprush · 01-27-2018, 11:11 PM

Quote:

Originally Posted by Cgocifer

Installed Powerstop brake pads. They are awesome!! Almost no dust and didn't notice any difference in stopping power. The car used to be covered in black dust even after short drives. Now, nothing even after some really hard stops bedding the pads in. Woot!!

Can you supply the part# for the pads and where you bought them. Thx.

Cgocifer · 01-27-2018, 11:16 PM

Quote:

Originally Posted by 1hprush

Can you supply the part# for the pads and where you bought them. Thx.

Powerstop Z26 pads. The SS 1LE uses C7 Z06 pads (hard to find that online, but just use part numbers (1405 and 1718). Got mine from Summit.

mekirk2 · 01-27-2018, 11:48 PM

Yes, get the part numbers from powerstop and buy them on Amazon. DO NOT trust Amazons part numbers for the SS - they were (and probably still are) incorrect.

NowaChevyGuy · 01-28-2018, 07:47 AM

Quote:

Originally Posted by KGen6

Haters gonna hate. I think this looks cool

It's not what you bought it's what you built, and I know I can't walk away from her without looking back. You know when it's in your blood.

Rock on my mod'in friends!

1hprush · 01-28-2018, 08:58 AM

Quote:

Originally Posted by Cgocifer

Powerstop Z26 pads. The SS 1LE uses C7 Z06 pads (hard to find that online, but just use part numbers (1405 and 1718). Got mine from Summit.

keon718nyc · 01-28-2018, 09:12 AM

Quote:

Originally Posted by Booher

I've been trying to get some stuff done to my car before a camaro event I was just in called camaros on the bridge. They shut down the London bridge for a little bit and let us park there. Anyways, I put on diode dynamic blacked out side markers, un badged the ss' s, painted the calipers with a matching paint with color code, put in the blacked out tails and third brake light, some led bulbs, and put some tint on my rear bumper reflectors. I even did the back sides of the calipers, just because lol. I even stuck on some jam handles to try them out, and they are pretty badass!

Car looks great buddy! I wish green was around when i was shopping for my Camaro. Love that dam color!

ssmike · 01-28-2018, 11:16 AM

Bought it!

Gunkk · 01-28-2018, 11:19 AM

That White on Black and Red looks good!

Well done!

chevyboy01438 · 01-28-2018, 11:31 AM

Put a few miles on her, almost broke in

ssmike · 01-28-2018, 11:59 AM

Quote:

Originally Posted by Gunkk

That White on Black and Red looks good!

Well done!

Thanks!

01-27-2018, 05:57 PM	#4509
driven2exceSS Drives: 2016 2SS BLK A8 Vert Join Date: Dec 2017 Location: MA Posts: 1,029	Finally installed both the Pray ported stock IM, and Dry RotoFab!! Then what? I couldn't resist test driving... Temps a lil on the cool side for the tires to really get into throttle much from a stop, roads had residual salt and snow melt run-off too. Otherwise sounded and felt strong! Now it needs a nice bath, damn-it! __________________ NPP, MRC, Tinted side & rear reflectors, OEM ZL1 Rockers / 3rd Brake / Darken tail lights, OEM Blk rear splash guards, Satin hood wrap, Fuse pull, Sound tube delete, Cat delete, Ported 95 TB, Ported MSD IM, Dry RotoFab, ARH 1 7/8 headers, E85, "Performance Dyno" Tune, BMR "pieces", "Track" alignment, Hawk DCT-70/70's w/SRF, Goodridge lines, Ti shims, Red powdered calipers, 18" APEX SM-10's w/ Pirelli DH's, FE4 Vert swaybars, Brake cooling ducts, ATI 10% UD, Vorshlag camber plates, OEM 1LE Splitter w/APR Ext., Velossa BIG MOUTH Ram Air, CF QA1, ZLE brakes(F)

01-27-2018, 06:04 PM	#4511
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 979	Few cosmetic upgrades I've been trying to get some stuff done to my car before a camaro event I was just in called camaros on the bridge. They shut down the London bridge for a little bit and let us park there. Anyways, I put on diode dynamic blacked out side markers, un badged the ss' s, painted the calipers with a matching paint with color code, put in the blacked out tails and third brake light, some led bulbs, and put some tint on my rear bumper reflectors. I even did the back sides of the calipers, just because lol. I even stuck on some jam handles to try them out, and they are pretty badass! Attached Images

01-27-2018, 08:29 PM	#4512
Doug kj6aco Drives: 2017 1LT RS M6 Join Date: Jun 2017 Location: Oceanside, CA Posts: 82	Coastal Cruze in San Diego San Diego Camaro Club had a coastal run from Carlsbad down the coast hwy 101 to Moonlight Beach, Mt Soloda, Cabrio Monument, and than to a local burger joint fun time had by all. Attached Images

01-28-2018, 11:16 AM	#4519
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,840	Bought it! Attached Images

01-28-2018, 11:31 AM	#4521
chevyboy01438 Drives: 2010 Camaro 1SS Join Date: Mar 2015 Location: Iowa Posts: 536	Put a few miles on her, almost broke in Attached Images __________________ Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper, 11/30/17 \| Club F1FTY

01-27-2018, 05:57 PM	#4510
Cgocifer Drives: 2018 1SS 1LE, 2015 RAM Ecodiesel Join Date: Oct 2017 Location: Maryland Posts: 1,451	Installed Powerstop brake pads. They are awesome!! Almost no dust and didn't notice any difference in stopping power. The car used to be covered in black dust even after short drives. Now, nothing even after some really hard stops bedding the pads in. Woot!!

01-27-2018, 11:48 PM	#4515
mekirk2 Drives: 2016 2SS Ragtop Garnet Red Join Date: Sep 2016 Location: Alabama Posts: 447	Yes, get the part numbers from powerstop and buy them on Amazon. DO NOT trust Amazons part numbers for the SS - they were (and probably still are) incorrect.

01-28-2018, 11:19 AM	#4520
Gunkk Thank you Al Oppenheiser! Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017 Location: Sarasota, FL Posts: 4,975 View My Garage	That White on Black and Red looks good! Well done!

User Name		Remember Me?
Password