10-23-2017, 12:23 PM | #1 |
Drives: 2019 SS A10 Join Date: Mar 2015
Location: Arizona
Posts: 487
|
Replacing steering wheel
Has anyone successfully switched out a 6th gen steering wheel on a 12-15 camaro? If so does everything function properly without messing with it? Thanks in advanced
__________________
Black 2019 SS A10, MBRP Exhuast, Soler performance Ported Throttlebody, Cold Air Inductions CAI, BMR equipped, Stance SFO7 on nitto NT555G2 tires, Limited Edition White Racing Seats, ZL1 1LE Splitter, Carbon Sideskirts, Gorilla Splitters areo kit, Next Gen Speed Diffuser, JWmotorsports LED side markers
|
10-23-2017, 12:33 PM | #2 |
I would like to know as well I like the design of it
|
|
10-23-2017, 01:19 PM | #3 |
Drives: 2013 Camaro Dusk 2SS/6 Join Date: Sep 2013
Location: New Jersey
Posts: 1,586
|
highly doubtful... with switches on the wheel I'm sure the plug is different or wired differently
|
10-23-2017, 02:09 PM | #4 |
Drives: 2012 2SS/RS, 1968 SS Join Date: Feb 2012
Location: Southeast, PA
Posts: 2,078
|
There was discussion about putting a 6th gen wheel here: http://www.camaro5.com/forums/showthread.php?t=445431
I just went the route of a suede 1LE wheel on my 1LS.
__________________
LS3 Crate Engine Swap | CSP Custom Cam 232/240 .615/.615 113 +3 | Stainless Power LT Headers | Z28 Intake | Borla S-Type Exhaust | FTI Triple-Disc Billet 3200 Stall
2012 Camaro 2SS/RS | 1968 Camaro SS | 2020 Cadillac CT5 Premium Luxury | 2021 Spark LS |
10-23-2017, 02:26 PM | #5 |
Drives: 2013 Camaro Dusk 2SS/6 Join Date: Sep 2013
Location: New Jersey
Posts: 1,586
|
wow, looks like if you replace the clockspring... it pretty close to plug-n-play. Just need to run a wire for the heater (if you get the heated wheel).
|
10-23-2017, 03:38 PM | #6 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,569
|
I thought about this but I think the wheel is too small for my tastes. Or it at least looks that way. It can be made to work, but I think some wiring work has to be done for the wheel heater.
I installed a 2014 ZL1 leather wheel in my 2010 SS. It looks amazing and feels so much better than the OE wheel. Very easy install.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
10-24-2017, 04:45 AM | #7 |
Drives: 2014 Camaro 2LS Join Date: Nov 2015
Location: Roc NY
Posts: 503
|
I would love to change the steering wheel. But no way am I paying close to 1000 to change it.
__________________
2014 Camaro BLK 2LS, MRT 2 exhaust,CAI,Anzo projector headlights,Morimoto HID,Aftermarket fog lights,RS tail lights, Strut tower brace.
|
10-24-2017, 05:54 AM | #8 |
|
Looks too small, kid like, even on the demure 6th Gen.
|
|
|
Thread Tools | |
|
|