You are browsing camaro5 
 |
|
03-05-2021, 01:17 AM
|
#1 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,062
|
Holley Dual Plenum Intake
Has anyone done anything with the dual plenum intake from Holley yet??
Reading the article I got from Holley it showed pretty good results without TQ loss in the lower RPM range and it actually made good TQ through the whole range. https://www.holley.com/products/ls_p...s/parts/822242
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
03-05-2021, 12:49 PM
|
#2 |
|
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,884
|
Those gains appear to be on an LS6/cathedral head if their chart is correct. Not sure if i have seen anyone who has tried it but it definitely is cool looking
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
|
|
|
|
|
|
|
 |
|
|
