What did you do to your 6th Gen Camaro today?! - Page 200

1BlueSS · 04-06-2017, 06:05 PM

Cleaned it up and put the tow took on. Been wanting to get tint but I've either been working or the weather hasn't been great.

srcstc · 04-06-2017, 06:41 PM

Quote:

Originally Posted by Abdulisraddd

Wheels!

Sent from my iPhone using Tapatalk

Those look great. Especially the black on white. Can you post more pics?

Sent from my iPhone using Tapatalk

Abdulisraddd · 04-06-2017, 10:12 PM

Quote:

Originally Posted by srcstc

Those look great. Especially the black on white. Can you post more pics?

Sent from my iPhone using Tapatalk

No problem I'll take some in the morning

Sent from my iPhone using Tapatalk

Neverenuff · 04-07-2017, 12:14 AM

Quote:

Originally Posted by RicSimonis

Really curious how the front turn signal replacement went. The passenger side seems easy enough, but the driver's side looks to be a pain. Unless I'm missing a secret (which is probably the case).

Sorry for the late reply. I was in the garage installing my new exhaust.
Unlike the reverse light LEDs, the front turn signals each need their own resistor. Like you said, the passenger side is pretty simple. The drivers side has a rubber cover on top that you can just pull back and you will see the bulb just like the other side. The rubber piece is there to seal off the air that's coming in through the grill, up behind the headlight and into the air filter. I didn't want to obstruct the airway with a resistor hanging down. I added a few inches of wire to each end of the resistor and that gave me enough room to move it outside the air box. I used stainless steel zip ties and mounted it out of the way. I'll take some
Pics tomorrow to show what I'm talking about.

qnhouston · 04-07-2017, 08:27 AM

For the OCD types.

Neverenuff · 04-07-2017, 11:19 AM

Quote:

Originally Posted by qnhouston

For the OCD types.

I hate it when I miss one of those moments by 1 mile. I was going to take a pic of my previous cars odometer when it reached 12345 but I was distracted and didn't notice till it was already at 12346.

Abdulisraddd · 04-07-2017, 11:22 AM

Quote:

Originally Posted by srcstc

Those look great. Especially the black on white. Can you post more pics?

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Neverenuff · 04-07-2017, 12:25 PM

/\/\/\ Very nice. These cars look so good in Summit White but I may be a little biased. I ordered those exact wheels but after waiting 4 days and and still no tracking number and told it would be another 3-4 till they shipped when they were supposedly in stock 200 miles away, I canceled my order. I'm not really patient when it comes to delivery delays. I order a lot from Amazon Same Day and Prime Now 1 hour delivery so it's kinda spoild me. Lol

Neverenuff · 04-07-2017, 12:32 PM

Abdulisraddd How do you like the Roto Fab with the ported intake/tb? I'm going to install my RotoFab with the sound tube delete today. I'm really interested in getting the ported tb/intake. I love the looks of the MSD intake but for $1,000 it's kinda expensive considering some factory ported ones outperform it.

RicSimonis · 04-07-2017, 01:21 PM

Quote:

Originally Posted by Neverenuff

Sorry for the late reply. I was in the garage installing my new exhaust.
Unlike the reverse light LEDs, the front turn signals each need their own resistor. Like you said, the passenger side is pretty simple. The drivers side has a rubber cover on top that you can just pull back and you will see the bulb just like the other side. The rubber piece is there to seal off the air that's coming in through the grill, up behind the headlight and into the air filter. I didn't want to obstruct the airway with a resistor hanging down. I added a few inches of wire to each end of the resistor and that gave me enough room to move it outside the air box. I used stainless steel zip ties and mounted it out of the way. I'll take some
Pics tomorrow to show what I'm talking about.

Very much appreciated. No excuse necessary, but installing an exhaust will certainly qualify.
Always a little apprehensive tearing into things without some intel. What bulbs did you use? (Sorry if I missed that info.)

camaromike77 · 04-07-2017, 03:31 PM

Quote:

Originally Posted by Neverenuff

I hate it when I miss one of those moments by 1 mile. I was going to take a pic of my previous cars odometer when it reached 12345 but I was distracted and didn't notice till it was already at 12346.

Ha! Sounds familiar!!

justiny · 04-07-2017, 05:33 PM

san gabriel mountains, CA

camaromike77 · 04-07-2017, 06:05 PM

Quote:

Originally Posted by justiny

san gabriel mountains, CA

That is one of the BEST pics I have ever seen!!!!!!! Postcard material...... BEAUTIFUL!

GroundhogSS · 04-07-2017, 06:37 PM

Quote:

Originally Posted by camaromike77

That is one of the BEST pics I have ever seen!!!!!!! Postcard material...... BEAUTIFUL!

Totally agree. Great pic. Nice looking car, also. But I might be biased.

04-06-2017, 06:05 PM	#2787
1BlueSS Drives: 2017 Camaro 1SS Join Date: Jul 2016 Location: Texas Posts: 219	Cleaned it up and put the tow took on. Been wanting to get tint but I've either been working or the weather hasn't been great. __________________ 2017 1SS Hyper Blue M6

04-07-2017, 08:27 AM	#2791
qnhouston Drives: 2LT GAZ H0Y IO6 LGX MX0 RIK WRS ZN2 Join Date: Nov 2016 Location: Houston Posts: 31	This is what I did yesterday. Speed and Odometer are all 3's For the OCD types. Attached Images

04-07-2017, 12:25 PM	#2794
Neverenuff Drives: '17 2SS A8 Nav NPP Join Date: Jul 2016 Location: Fort Worth,TX Posts: 87	/\/\/\ Very nice. These cars look so good in Summit White but I may be a little biased. I ordered those exact wheels but after waiting 4 days and and still no tracking number and told it would be another 3-4 till they shipped when they were supposedly in stock 200 miles away, I canceled my order. I'm not really patient when it comes to delivery delays. I order a lot from Amazon Same Day and Prime Now 1 hour delivery so it's kinda spoild me. Lol __________________ 2017 Summit White 2SS \| A8 \| Nav \| MRR M017's \| Nitto NT555 G2's 285/30, 305/30 \| GM Strut Tower Brace \| Gloss Black GM Front Splitter \| GM Dark Tail Lights \| Black front Bowtie rear Bowtie delete \| Oracle LED Side Markers \| Roto Fab CAI \| SEMA grill \| Borla S-Type axle back \| Borla X Pipe/Mid Pipe w/2nd cat deletes \| Power Stop Z26 pads \| BMR sway bars & end links, upper/lower trailing arms, upper control arms, chassis braces \| ACS ZL1 style rockers \| OEM ZL1 rear spoiler \| ZL1 start button \| Mishimoto catch can \| ZL1 6 Pots w/2 piece 390mm rotors \| Valentine 1 hard wired \| Husky Liners \|

04-07-2017, 12:32 PM	#2795
Neverenuff Drives: '17 2SS A8 Nav NPP Join Date: Jul 2016 Location: Fort Worth,TX Posts: 87	Abdulisraddd How do you like the Roto Fab with the ported intake/tb? I'm going to install my RotoFab with the sound tube delete today. I'm really interested in getting the ported tb/intake. I love the looks of the MSD intake but for $1,000 it's kinda expensive considering some factory ported ones outperform it. __________________ 2017 Summit White 2SS \| A8 \| Nav \| MRR M017's \| Nitto NT555 G2's 285/30, 305/30 \| GM Strut Tower Brace \| Gloss Black GM Front Splitter \| GM Dark Tail Lights \| Black front Bowtie rear Bowtie delete \| Oracle LED Side Markers \| Roto Fab CAI \| SEMA grill \| Borla S-Type axle back \| Borla X Pipe/Mid Pipe w/2nd cat deletes \| Power Stop Z26 pads \| BMR sway bars & end links, upper/lower trailing arms, upper control arms, chassis braces \| ACS ZL1 style rockers \| OEM ZL1 rear spoiler \| ZL1 start button \| Mishimoto catch can \| ZL1 6 Pots w/2 piece 390mm rotors \| Valentine 1 hard wired \| Husky Liners \|

04-07-2017, 05:33 PM	#2798
justiny Drives: ... Join Date: Jan 2017 Location: London Posts: 31	san gabriel mountains, CA Attached Images

User Name		Remember Me?
Password