Has anyone tried a 345/30/19 on ZL1 1LE rears? - Page 2

angryBits · 12-09-2018, 05:55 PM

*BUMP*

I'm also interested in running a wider tire in the rear.
335 on the stock wheels would be ideal, maybe 345 if they can be had without rubbing.

Anyone try this?

RUQWIKR · 12-09-2018, 06:27 PM

Quote:

Originally Posted by angryBits

*BUMP*

I'm also interested in running a wider tire in the rear.
335 on the stock wheels would be ideal, maybe 345 if they can be had without rubbing.

Anyone try this?

Hoosier R7's are barely wider than the 325 G3R's - no rubbing on my car on the 12" rim. Your car sits a bit lower, but, I would not think they would rub as they are about the same rollout, too as the 325 G3R. Running -1.8 camber in rear.

Alain · 12-09-2018, 07:52 PM

Quote:

Originally Posted by angryBits

*BUMP*

I'm also interested in running a wider tire in the rear.
335 on the stock wheels would be ideal, maybe 345 if they can be had without rubbing.

Anyone try this?

I don't have my car at the house, it's getting paint protection film put on it. So I can't go out and check the clearance on the inside of the wheel wells.

We know that the tire wont rub the sheet metal on the quarter panel because the stock tires stick outside the body as it is.

I know your car is at the shop as well so you can't go out and check.
Hopefully i'll remember to check the clearance on the inside of the wheel well before I put the cover on it when I get the car back in a few days.

angryBits · 12-09-2018, 10:01 PM

Quote:

Originally Posted by Alain

I don't have my car at the house, it's getting paint protection film put on it. So I can't go out and check the clearance on the inside of the wheel wells.

We know that the tire wont rub the sheet metal on the quarter panel because the stock tires stick outside the body as it is.

I know your car is at the shop as well so you can't go out and check.
Hopefully i'll remember to check the clearance on the inside of the wheel well before I put the cover on it when I get the car back in a few days.

Are you running 335s or 345s?

camareoZ · 12-10-2018, 07:06 AM

Interested as well.

tomster · 12-10-2018, 07:19 AM

I ran 345/30r19 and 325/30r19 r7's at the track with no problems on the factory wheels

tomster · 12-10-2018, 07:29 AM

sorry no close up photo's with them on just on track photos and while changing them...

ICTsccaCamaro · 12-10-2018, 07:47 AM

I'm planning on running the 355 ACR Kumho's on the rear this season to see if the car will actually stick and put power down with my poor throttle management.

angryBits · 12-10-2018, 01:25 PM

Quote:

Originally Posted by tomster

I ran 345/30r19 and 325/30r19 r7's at the track with no problems on the factory wheels

Good to hear, thank you!

cbourbs · 04-08-2019, 10:44 PM

Anybody ever end up putting 325 30 19s on the front and 345 30 19s on the rear on the zl1 1le? Looking at trying to put the Michelin pilots sport 4s on the stock rims for street use.

Want to make sure they don't rub when hitting bumps or rub at full lock

New Camaro owner here...looking forward to learning lots ��

19Nasty1le · 04-09-2019, 04:16 AM

Quote:

Originally Posted by tomster

I ran 345/30r19 and 325/30r19 r7's at the track with no problems on the factory wheels

Apparently he has ^

Quote:

Originally Posted by cbourbs

Anybody ever end up putting 325 30 19s on the front and 345 30 19s on the rear on the zl1 1le? Looking at trying to put the Michelin pilots sport 4s on the stock rims for street use.

Want to make sure they don't rub when hitting bumps or rub at full lock

New Camaro owner here...looking forward to learning lots ��

When did you order your ZLE? Do you have a TPW/Status Code? Few of us Canadians waiting well past TPW and they won’t give us reasons as to why.. mine was 03/18

Scottyz · 04-09-2019, 08:05 AM

Quote:

Originally Posted by cbourbs

Anybody ever end up putting 325 30 19s on the front and 345 30 19s on the rear on the zl1 1le? Looking at trying to put the Michelin pilots sport 4s on the stock rims for street use.

Want to make sure they don't rub when hitting bumps or rub at full lock

New Camaro owner here...looking forward to learning lots ��

I hope the MPSS do fit. Then I’ll know the size for my second set of rims.
Welcome to the gang brother

cbourbs · 04-09-2019, 09:07 AM

Quote:

Originally Posted by 19Nasty1le

Apparently he has ^

When did you order your ZLE? Do you have a TPW/Status Code? Few of us Canadians waiting well past TPW and they won’t give us reasons as to why.. mine was 03/18

GM picked up my order on the 11th of March. I've been in contact with the dealer and it hasn't been shipped as of yet. Hoping to see it soon

cbourbs · 04-09-2019, 09:09 AM

Quote:

Originally Posted by Scottyz

I hope the MPSS do fit. Then I’ll know the size for my second set of rims.
Welcome to the gang brother

Thanks!

I am also wondering with 325s on the front it they would trail allot on the highway. That might get a bit much to handle for long road trips

12-09-2018, 05:55 PM	#15
angryBits Drives: ZL1 1LE A10 Join Date: Mar 2015 Location: CA Posts: 1,093	BUMP I'm also interested in running a wider tire in the rear. 335 on the stock wheels would be ideal, maybe 345 if they can be had without rubbing. Anyone try this? __________________ Current: 2019 ZL1 1LE A10 Mods: MPS4s Tires \| Borla Atak \| CF Steering Wheel Previous: 2018 ZL1 1LE M6 \| 2017 Z06 Z07 M7 \| 2017 GS A8 \| 2015 ZL1 M6 \| 2013 GT500

12-10-2018, 07:06 AM	#19
camareoZ Drives: 2018 Camaro ZL1 1LE (Black) Join Date: Jan 2018 Location: TEXAS Posts: 14	Interested as well. __________________ 2018 Camaro ZL1 1LE Mods: TSP ceramic 2” headers, Borla ATAK full cat-back exhaust, Roto-Fab CAI, E85, TSP Stage 2 Cam, MM catch can. Planned Mods: Mag 2650R

12-10-2018, 07:19 AM	#20
tomster RedLine Drives: 2022 ZL1 1LE Join Date: Dec 2012 Location: Chicago area Posts: 792 View My Garage	I ran 345/30r19 and 325/30r19 r7's at the track with no problems on the factory wheels __________________ 2018 GMC 2500 "Blue" (Sold) 2018 ZL1 1LE Hyper Blue" (Sold) 2018 CTS-V "Black" (Sold) 2022 GMC 2500 "Blue" 2022 ZL1 1LE 6spd "Rapid Blue" 2023 ZL1 1LE Auto Rapid Blue (ordered)

12-10-2018, 07:29 AM	#21
tomster RedLine Drives: 2022 ZL1 1LE Join Date: Dec 2012 Location: Chicago area Posts: 792 View My Garage	sorry no close up photo's with them on just on track photos and while changing them... __________________ 2018 GMC 2500 "Blue" (Sold) 2018 ZL1 1LE Hyper Blue" (Sold) 2018 CTS-V "Black" (Sold) 2022 GMC 2500 "Blue" 2022 ZL1 1LE 6spd "Rapid Blue" 2023 ZL1 1LE Auto Rapid Blue (ordered)

12-10-2018, 07:47 AM	#22
ICTsccaCamaro ITCRNRS Drives: 2018 ZL1 1LE Join Date: Jun 2012 Location: Wichita KS Posts: 1,575	I'm planning on running the 355 ACR Kumho's on the rear this season to see if the car will actually stick and put power down with my poor throttle management. __________________ 2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap

04-08-2019, 10:44 PM	#24
cbourbs Drives: 2019 ZL1 1LE Join Date: Jan 2019 Location: Alberta Posts: 72	Anybody ever end up putting 325 30 19s on the front and 345 30 19s on the rear on the zl1 1le? Looking at trying to put the Michelin pilots sport 4s on the stock rims for street use. Want to make sure they don't rub when hitting bumps or rub at full lock New Camaro owner here...looking forward to learning lots ��

User Name		Remember Me?
Password