10-08-2018, 10:11 AM | #1 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
Custom Painted MSD Atomic Airforce Manifold
Check this out! I spent the day yesterday porting the manifold, painting it to match the exterior of the Camaro, painted the lettering black and then bye bye heat soak! Thanks to Heat shield products we were able to make sure the temp will stay down. You can do anything you put your mind to. Shout out to MSD and Katech for your awesome parts!
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-08-2018, 10:12 AM | #2 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,771
|
It's definitely yellow. Krylon touch ftw.
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
10-08-2018, 10:17 AM | #3 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
Custom Painted MSD Atomic Airforce Manifold
Thanks, had my local paint shop mix the paint for me.
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-08-2018, 10:25 AM | #4 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
looks great....
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
10-08-2018, 03:49 PM | #5 |
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Do you have a link to the heat shielding you used?
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
10-08-2018, 04:03 PM | #6 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
Here is the link. https://www.autoanything.com/exhaust...A7245A0A0.aspx Significantly reduces the amount of heat transfer from the top of the engine to the intake manifold, helping to reduce air-intake temperatures and increase horsepower. Lower air-intake manifold temperatures create a denser air/fuel mixture, creating more power. I bought the 11x23 piece and still have some left over.
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-08-2018, 05:47 PM | #7 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,750
|
Really nice work!!! Paint work came out great and heat shielding was a nice touch.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
10-08-2018, 06:11 PM | #8 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
Thank you very much. Going to install tomorrow.
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-08-2018, 08:32 PM | #9 |
Drives: 2016 2ss Join Date: Jan 2017
Location: Dayton Ohio
Posts: 118
|
Seen your from sandusky, did you port your msd yourself or have someone donit?
|
10-09-2018, 05:36 AM | #10 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
Yes I am from Sandusky. I did all the porting work myself.
Thanks for asking Joe
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-09-2018, 09:20 AM | #11 |
@Blackmamba_1LE
Drives: 2017 1LE Join Date: Jun 2017
Location: South Florida
Posts: 740
|
wonder if theres test of that heat shielding... looks interesting
__________________
OG: Pray Perf FBO ET:11.5 @119 THEN:LT4 SC, E85 + Meth :10.6 @135 NOW: H/C Whipple 416ci
|
10-09-2018, 12:45 PM | #12 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
There has been testing I researched it myself.
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
10-09-2018, 05:21 PM | #13 |
Drives: 2016 ss camaro Join Date: Jan 2018
Location: Bellflower ca
Posts: 199
|
Just ordered the insulation tape, thanks for posting the part #.
__________________
|
10-09-2018, 07:28 PM | #14 |
Drives: 2017 Camaro 1SS A8 Join Date: Sep 2018
Location: Sandusky Ohio
Posts: 15
|
No problem. I installed the Manifold today and had know problem even with the heat shield being on.
__________________
2017 1SS Bright Yellow A8
Speed Engineering 1 7/8 headers, MBRP 3in Dual Cat Back Quad Tips Race Version, Katech 103mm TB, K&N CAI, MSD Atomic Airforce Manifold. |
|
|
Post Reply
|
Tags |
heat shield, katech, msd atomic airforce manifold |
|
|